DYNAMIC ANALYSIS OF THE LEVER MECHANISM
Journal Title: Проблеми тертя та зношування - Year 2016, Vol 72, Issue
Abstract
The iterative method of the law of movement of an initial link of the lever mechanism in time of settled regime definition, not connected with dynamic synthesis, is offered.
Authors and Affiliations
O. V. BASHTA, V. N. MALKOV, P. L. NOSKO, P. V. FIL, Y. V. PYSHCHENKO
INVESTIGATION OF THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF DISCRETE-TEXTURED OIL-BASED SURFACES FORMATION ON THE TRIBOSYS-TEMS FRETTING RESISTANCE
A study was carried out to determine the effectiveness of increasing the fretting resistance of tribosystems by the formation of discrete-textured oil-based surfaces in the form of regularly located microcavities. Phenom...
GEARING WITH INCREASED TEETH WEAR RESISTANCE
The most important criterions of gearing efficiency are teeth wear resistance. The or-der of synthesis of rack cutter instrument for manufacture of gears with increased teeth wear resistance is considered. It is based on...
THERMO-KINETIC MODEL FOR ASSESSMENT OF DURABILITY OF CONTACT SURFACES UNDER LUBRICATING IN NON-STATIONARY MODE OF OPERATION
A phenomenological model for assessing the durability of the wear layer is suggested. The model considers two areas of damage accumulation, namely the areas of multiple-cycle contact fatigue and debris layer. In the mode...
Academician Ahad Hanahmad oglu Janahmadov creative career
Academician Ahad Hanahmad oglu Janahmadov creative career
FILLING OF LOLA FIBER TO ABRASIVE CONNECTION ORGANOPLASTICS ON THE BASIS OF FENILON C-1
It was investigated the influence of organic fiber Lola on the abrasive wear resistance of the aromatic polyamide of phenylone С-1 in the article. The increase of wear resistance of the materials which work in aggressive...