Dynamic Impact Analysis on ATV Upright
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
Uprights play a vital role carrying the complete wheel assembly with it and attached to vehicle suspension system. The knuckle has to design in order to sustain all the loads acting on the vehicle during the course of dynamic motion. The loads taken up by tire’s are directly transferred to the uprights, because tire with upright forms a single assembly unit, but near the upright hard point the suspension forms a linkage, which even takes sprung mass loads. Therefore the knuckle in commercial vehicle is manufactured using EN graded material or the cast iron, but the same can be designed and manufactured using aluminium material which can offer same strength characteristics but with decreased in overall sprung mass weight.
Authors and Affiliations
U Yashvanth, Mohammad Raffi, G Raghu Vamsi Reddy, Dr. C. Prasad, Dr. K. N. Balan
Keywords
Related Articles
- EP ID EP672245
- DOI 10.24247/ijmperdoct201960
- Views 118
- Downloads 0
The FEA Validation of Side Underrun Protection Device (SUPD) for Heavy Commercial Vehicles
There exists a large mismatch between a passenger vehicle and heavy commercial vehicle so it may lead to fatalities or injuries when a light passenger vehicle like bicyclist or a motorcyclist is collided with the lateral...
Optimizing Process Parameters of Nano SiC Reinforced AA6061 Cold Extrusion using Response Surface Method
The paper focus on preparation of AA 6061 composites with nanoSiC dispersed at varying weight fractions. AA 6061 billets are extruded by varying extrusion ratio, die included angle, ram speed and %SiC, considering Force...
Evaluation of High Speed Diesel Engine Performance and Charecteristics of its Emissions with Carbon Nanotubes Added Ethanol-Diesel Blends
The main criteria of this experimental work is to study and analyze the performance and emission characteristics of a high speed single cylinder 4 stroke kirloskar AV1 Diesel engine with the carbon nanotubes, added with...
The Thermodynamic Calculation of Offset Shafts Rotary Engine Ideal Cycle with External Heat Supply
A specific ideal thermodynamic cycle was determined, quite accurately describing the work of offset shafts rotary heat engine with external heat supply. A thermal calculation was made and the values of thermodynamic cond...
Eign-Limits Uncertainty Methodology for Temperature Calibration by Fixed Points and Comparison
Calibration measurement uncertainty of Platinum Resistance Thermometer (PRT) was estimated in International Temperature Scale 1990 (ITS-90) at defined fixed points [1]but it was not gives a criteria to find the uncertain...