Effect of binder with nano Ni on mechanicalproperties of TiC based hard alloys
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 91, Issue 3
Abstract
Titanium carbide based hard alloys with nickel-chromium binder possess high hardness, wear and heat resistance. In order to improve physical and mechanical properties of alloys the polycarbide basis TiC-5WC-5NbC and Ni (nano Ni)-Cr binder were used. The physical and mechanical properties of the alloys with 10, 18 and 24% (wt) of the binder, which contained 7,5, 13,5 and 18% (wt) of nano Ni or fine grained Ni respectively, were studied. It is found that the use of nano nickel (70 nm) compared to fine nickel (1..2 μm) allows to obtain lower porosity, more fine-grained microstructure (d = 0,7..1 μm) and higher physical and mechanical properties of the alloys by 10..15%. Binder with nano Ni prevents formation of carbide skeleton and the nano Ni content increase results in the hardness, micro hardness, transverse rupture strength and fracture toughness increase.
Authors and Affiliations
Halyna Kramar, Lyudmyla Bodrova, Yaroslav Kovalchuk, Sergiy Marynenko, Ihor Koval
Keywords
Related Articles
- EP ID EP438081
- DOI 10.33108/visnyk_tntu2018.03.063
- Views 70
- Downloads 0
Influence of the cutting direction of Charpy specimens from steel 10GN2MFA on the components of the fracture energy and the ductile-to-brittle transition temperature
The Charpy specimens impact tests are one of more simple and inexpensive methods to determine the mechanical properties of materials. The results of these tests can be used to estimate the strength and durability of larg...
Calculation of constructive parameters of SMA damper
Shape memory alloy (SMA) based damper device is presented in this paper. The device is composed of pre-tensioned SMA wires and two pre-compressed springs which supply tension of the wires. Pre-tensioned SMA wires provide...
Research of technological process of screw tools manufacturing and calibrating
Equipment for continuous transportation of bulk and granular materials is the basis for complex mechanization of loading-unloading operations, which increase work output and production efficiency. The engineering design...
Selecting cutting modes for high-speed titanium-tungsten instruments at cutting pneumatic tires
Results of experimental researches of technical processes of used pneumatic automobile tires utilization are given to determine the most effective cutting tool’s material and cutting mode during their cutting in half.
The procedure of the specimen loading parameters in fixing video frame of crack profile
Digital videography, which makes it possible to accomplish direct measurements of geometric parameters of the crack profile in real time, finds wide use in experimental fracture mechanics. Practical implementation of vid...