Estimation of the pipelines working capacity basing on the results of semimode testing
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
Analysis of the state of arts of estimation the pipelines operation capacity in Ukraine and other countries taking advantage of the technology of pipeline pigging and integrity management (PPIM аnd ILI technology) has been carried out. Basing on the results of semimodel testing, some aspects of estimation of defects of pipe metal are considered. The load-bearing capacity of a segment of a pipeline with elastic-plastic deformation, which had been detected during the inside-pipeline diagnostics of a long-time operating gas pipeline of the outer diameter 1220 mm has been experimentally investigated. The paper presents some particularities of experimental estimation of the pipeline segment strength in zones of local plastic deformation. The stress-strain state of locally plastically deformed segments of the pipeline has been determined using the semimodel testing. Basing on the investigations, recommendations for engineering practice are proposed.
Authors and Affiliations
Andrii Kychma, Josyp Luchko
Keywords
Related Articles
- EP ID EP373043
- DOI 10.33108/visnyk_tntu2018.02.039
- Views 82
- Downloads 0
Increasing of efficiency of manual arc welding and surfacing of engineering products
The data on the exothermic mixture amount in the electrodes coating influence on their heating and melting are given. Experimental methods found that exothermic reactions in the stage of heating and melting take place at...
Studies of the effect of quenching oil on microstructure and mechanical properties of heat treated 34CrMo4 steel
Aim of this research was assessment of quenching oil influence on microstructure and mechanical properties of 34CrMo4 quenched and tempered steel. Conducted work includes analysis of microstructure and examining mechanic...
Autonomous power supply system for outdoor illumination of residential areas in the territory of Ukraine
The methodology and the calculation of the autonomous power supply system for outdoor illumination using solar batteries of KV 250M type, Li-ion batteries of LP48100ES type and the control system consisting of the MPPT c...
Resonance radial oscillations of a piezoceramic cylinders and spheres taking into account electromechanical losses
Hollow piezoceramic radially polarized cylinders and spheres widely used as sound transducers and receivers are considered. The most characteristic run mode of piezoceramic transmitters is resonant mode. In this paper, a...
The method of dynamic stresses determination of media with tunnel cavities
The method of studying the dynamic stress state of elastic media with tunnel cavities under the non-stationary load as the system of concentrated forces, which are applied in the internal points of media, is developed. O...