Effect of Fluidized- Bed Carburizing on Mechanical Properties and Abrasive Wear Behavior of Sintered Steels
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 3
Abstract
In this paper is studied the influence of fluidized bed carburizing of sintered steels, for three different types of powder. Carburization is one of the most popular variety of temochemical treatment. Usually, carburization occurs in the temperature range of 850-950 ºC. In powder metallurgy, the carburization had a great importance to establish the dependencies between porosity and their ability to take carbon.
Authors and Affiliations
Mihaela MARIN, Florentina POTECAŞU, Elena DRUGESCU, Octavian POTECAŞU, Petrică ALEXANDRU
Keywords
Related Articles
- EP ID EP627208
- DOI -
- Views 68
- Downloads 0
Elastoplastic Model for the Steel Bars under Thermal Treatments
In order to understand material behavior, during the stresses action produced by thermal effects of volume, was started from Hooke relations, whereat was added the expressions that take into account these effects. Have b...
The Conservability of Old Wood at the Contact with Metallic Structural Components from Artifacts
The paper presents the impact of metallic pieces being in contact with wood, as structural elements, used in obtaining artifacts. The paper studies, based on old samples, the reciprocal effect obtained at the wood-metal...
Treatment of Wastewater Resulting from the Metallic Coatings Process
The technological cleaning processes of steel strip surfaces used in metal coatings require organic or inorganic chemicals with a high risk of toxicity. To avoid pollution, the water resulting from these processes must b...
Contributions in the Domain of the Contact Stresses Between Cylinders of Cold Rolling
Elasto-plastic contact stresses between working cylinder and support cylinder of cold rolling using FEM are presented in this paper. Pressure and tractions resulted from the rolling process were obtained by using a calcu...
Two-way Shape Memory Effect in a Cu-13wt. %Al-4 wt.%Ni Shape Memory Alloy by the Thermo - Mechanical Cycling Method
A Cu - 13 % wt Al 4% wt Ni polycrystalline shape memory alloy has studied with a thermo mechanical cycling method. The two – way shape memory effect (TWSME) was obtained bending the alloy around a cylinder mold and by us...