Treatment of Wastewater Resulting from the Metallic Coatings Process
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 2
Abstract
The technological cleaning processes of steel strip surfaces used in metal coatings require organic or inorganic chemicals with a high risk of toxicity. To avoid pollution, the water resulting from these processes must be neutralized. During the degreasing process, alkaline solutions containing caustic soda (NaOH), tri-sodium phosphate (Na3PO4) and detergents are used and the pickling process is made in 15-20% HCl solution. Rinse waters resulting from these operations will have an alkaline pH respectively acid pH, with values depending on the duration of use or refresh solution. Neutralization was done with sulfuric acid solutions for alkaline water and sodium hydroxide solutions for acid water. The research aimed to establish the optimal conditions for neutralization and the optimal reagent consumptions.
Authors and Affiliations
Tamara RADU
Keywords
Related Articles
- EP ID EP577182
- DOI -
- Views 85
- Downloads 0
Wastewater Treatment Case Study - SEAU Braila
The paper analyses the influent and effluent parameters, as well as the efficiency of the purification process. CBO5 is found to be within the legal limits in terms of the amount of effluent suspensions of max 6.0 mg/L O...
Study Related to Improve Performance of a Neutralizing Gas Dynamics System
Worldwide, the series of attacks "with bomb" are the most common, accounting for over 80% of terrorist attacks. The many constructive solutions of Improvised Explosive Devices (I.E.D), would require for defusing sequence...
Some Researches on the Cutting Process Using a Stamping Device
The cutting process of the parts from the plates and strips consists in the action of two active elements of the stamping machine: device punch and active plate. The main actors on which the cutting process depends are t...
Corrosion Behavior of Zinc Alloy Layers
The alloying of zinc with some additional elements in specific quantities could be reliably used in the hot-dip coating process. These elements conferr substantially improved performance to the end-product specially by i...
The Influence of Cold Rolling on the Microstructure for Drawing Steels
The paper presents the structural changes that appeared in steel for deep drawing, as a result of cold rolling and of recrystallization thermal treatment. The research was conducted on samples taken from the rolled strap...