Effect of Intercritical Heat Treatment on Mechanical Properties of Plain Carbon Dual Phase Steel
Journal Title: Mehran University Research Journal of Engineering and Technology - Year 2018, Vol 37, Issue 1
Abstract
Mechanical properties of DP (Dual Phase) steels are greatly influenced by the microstructural features such as grain size, morphology and martensite volume fraction (Vm%). These microstructural features can be altered by changing the soaking time and temperature within intercritical zone. Present study aims to study the effect of intercritical annealing temperature and soaking time on Vm% and its effects on mechanical properties of plain low carbon steel grade (AISI 1020) steel having ferritemartensitemicrostructure. Nine DP steel specimens with various amount of martensite were produced via intercritical heat treatment. Mechanical properties including TS (Tensile Strength), hardness and toughness were characterized and co-related with martensite volume fraction. It was found that increasing the intercritical annealing temperature and soaking time increases the Vm%. The optimum TS and hardness were found at 64Vm% and then decrease with further increase in Vm%. The toughness was found to have linear relationship with Vm%.
Authors and Affiliations
I. A. Soomro, M. I. Abro, M. M. Baloch
Keywords
Related Articles
- EP ID EP252857
- DOI 10.22581/muet1982.1801.13
- Views 138
- Downloads 0
Renewable Energy Technologies Diffusion in Sindh: An Overview
The abundant resources of Sindh province for RE (Renewable Energy) such as wind, solar, etc. can be tapped through RETs (Renewable Energy Technologies) to fulfil energy needs. But RETs are still not able to make major br...
Analysis of Caustic Soda of Different Manufacturers in Pakistan for Mercerization of Cotton Textiles
Pakistan has sufficient production capacity of caustic soda to cater the needs of the local industry. Presently, Pakistan has four major plants with production capacity around 435,000 mega ton per year of caustic soda of...
A Family of 6-Point n-Ary Interpolating Subdivision Schemes
We derive three-step algorithm based on divided difference to generate a class of 6-point n-ary interpolating sub-division schemes. In this technique second order divided differences have been calculated at specific posi...
Polycaprolactone-Polydiacetylene Electrospun Fibers for Colorimetric Detection of Fake Gasoline
PCDA (Pentacosadiynoic Acid) monomers were successfully embedded in PCL (Poly ?-Caprolactone) polymer matrix by electrospinning process for the first time. The resultant EFM (Electrospun Fibers Mat) was photo-polymerized...
A Unified Bond Graph Modeling Approach for the Ejection Phase of the Cardiovascular System
In this paper the unified Bond Graph model of the left ventricle ejection phase is presented, simulated and validated. The integro-differential and ordinary differential equations obtained from the bond graph models are...