Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber
Journal Title: Polyolefins Journal - Year 2016, Vol 3, Issue 2
Abstract
A novel mixing approach for achieving a good dispersion of multi-walled carbon nanotubes (MWCNTs) in ethylene- propylene diene monomer (EPDM) matrix has been investigated. In this approach EPDM was modified with vinyltrimethoxysilane (VTMS) during melt mixing. In addition the effect of MWCNT concentration on mechanical and rheological properties of modified EPDM has been studied. The formulated composites by this method exhibited significantly enhanced physical properties even at very low nanotube concentration. The grafting reaction was confirmed by Fourier transform infrared spectroscopy (FT-IR) peak at 1070 and 1250 cm-1according to Si-O and Si-C vibration. The state of dispersion of the fillers in the polymer matrix was evaluated through transmission electron microscopy (TEM) and scanning electron microscopy (SEM), In addition surface topology was studied with atomic force microscopy (AFM). The results showed that VTMS-grafted on the EPDM surface improved the dispersion of MWCNTs in the matrix. The rheological characteristics have been studied by rubber process analyzer (RPA). Some properties such as storage modulus (Ǵ) and complex viscosity (η^*) increased with increasing MWCNT content. It was found that at concentration of 2 wt.% MWCNT, the nanocomposites exhibited notably enhanced mechanical properties such as modulus and tensile strength.
Authors and Affiliations
Fateme Khademeh Molavi, Sedigheh Soltani, Ghasem Naderi, Rohollah Bagheri
Keywords
Related Articles
- EP ID EP283159
- DOI 10.22063/POJ.2016.1293
- Views 120
- Downloads 0
Copolymerization of ethylene with α-olefins over highly active supported Ziegler-Natta catalyst with vanadium active component
The new highly active supported vanadium-magnesium catalyst (VMC) has been studied in α-olefin (1-butene, 1-hexene)/ ethylene copolymerization in the presence of hydrogen. Data on the effect of α-olefin/ethylene ratio in...
Amoco CD commercial polypropylene catalyst tailor-made for the Amoco-Chisso gas phase process
The commercial profile of the Amoco CD MgCl2 supported polypropylene catalyst is presented. The development, the unique method of preparation/production, with emphasis on particle morphology, and the parameters affecting...
Expected nucleation effects of carboxylic acid salts on poly(1-butene)
9,10-Dihydro-9,10-ethano-anthracene-11,12-dicarboxylic acid disodium salt (DHEAS) was synthesized and used as a nucleating agent for poly(1-butene) (iPB). The isothermal crystallization kinetics of iPB having different n...
Evaluation of hydrophilic properties of acrylonitrile/acrylic acid copolymer films dendrigrafted with citric acid
The present study investigates the hydrophilic properties of acrylonitrile/acrylic acid P(AN/AA) copolymer films with various acrylic acid (AA) contents dendrigrafted with citric acid from zero to fourth generation numbe...
Rheological, thermal and tensile properties of PE/nanoclay nanocomposites and PE/nanoclay nanocomposite cast films
The effects of three different mixers, two different feeding orders and nanoclay content on the structure development and rheological properties of PE/nanoclay nanocomposite samples were investigated. Fractional Zener an...