Expected nucleation effects of carboxylic acid salts on poly(1-butene)
Journal Title: Polyolefins Journal - Year 2016, Vol 3, Issue 1
Abstract
9,10-Dihydro-9,10-ethano-anthracene-11,12-dicarboxylic acid disodium salt (DHEAS) was synthesized and used as a nucleating agent for poly(1-butene) (iPB). The isothermal crystallization kinetics of iPB having different nucleating agents were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The results showed that the nucleating agents increased the crystallization temperature and the crystallization rate and shortened the crystallization half-time (t1/2). As well, the nucleating agents could be used as heterogeneous nuclei in the iPB matrix and decreased the size of iPB. When the nucleating agent was DHEAS, the crystallization temperature of iPB was up to 93.6°C which was higher than that of other nucleating agents for iPB and pure iPB. The crystallization half-time in the presence of DHEAS was 0.58 min which was less than that of other nucleating agents for iPB and pure iPB. In this case, the spherulitic size of iPB was the smallest and the morphology was changed, which indicated that DHEAS displayed better nucleation effect among the studied nucleating agents.
Authors and Affiliations
Tao Zheng, Qian Li, Huayi Li, Liaoyun Zhang, Youliang Hu
Keywords
Related Articles
- EP ID EP283168
- DOI 10.22063/POJ.2016.1264
- Views 131
- Downloads 0
Homogeneous and heterogeneous oligomerization reactions of olefins with unbridged metallocene catalysts
1-Pentene, respectively 1-hexene, were reacted with 13 homogeneous metallocene catalysts to give linear oligomerization products, predominantly dimers, with selectivities above 90%. The product distributions of the codim...
Compatibilization of polycarbonate/poly (ethyleneterephthalate) blends by addition of their transesterifcation product
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specifed mixing...
Production of titanium tetrachloride (TiCl4) from titanium ores: A review
Titanium (Ti) is the ninth most abundant element on earth. The titanium mineral ores are widely distributed in different parts of the world. The two main ores of titanium include rutile (TiO2) and ilmenite (FeO.TiO2). It...
Reaction dynamics during the testing of polymerization catalyst
The olefins polymerization process in a slurry reactor is discussed. The reaction rate dynamics was analyzed and the contributions of feed flow, gas-liquid mass transfer, polymerization reaction, and catalyst deactivatio...
Influence of annealing on anisotropic crystalline structure of HDPE cast films
High density polyethylene (HDPE) films were produced using cast film extrusion process with different draw ratios, ranging from 16.9 to 148.8. Morphology, crystallinty and orientation state of crystalline and amorphous p...