Effect of Non-Uniform Torsion on Elastostatics of a Frame of Hollow Rectangular Cross-Section
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2018, Vol 68, Issue 2
Abstract
In this paper, results of numerical simulations and measurements are presented concerning the nonuniform torsion and bending of an angled members of hollow cross-section. In numerical simulation, our linearelastic 3D Timoshenko warping beam finite element is used, which allows consideration of non-uniform torsion. The finite element is suitable for analysis of spatial structures consisting of beams with constant open and closed cross-sections. The effect of the secondary torsional moment and of the shear forces on the deformation is included in the local finite beam element stiffness matrix. The warping part of the first derivative of the twist angle due to bimoment is considered as an additional degree of freedom at the nodes of the finite elements. Standard beam, shell and solid finite elements are also used in the comparative stress and deformation simulations. Results of the numerical experiments are discussed, compared, and evaluated. Measurements are performed for confirmation of the calculated results.
Authors and Affiliations
Justín Murín, Mehdi Aminbaghai, Vladimír Goga, Vladimír Kutiš, Juraj Paulech and Juraj Hrabovský
Keywords
Related Articles
- EP ID EP43938
- DOI https://doi.org/10.2478/scjme-2018-0016
- Views 180
- Downloads 0
The Effect of Landslide on Gas Pipeline
The present paper deals with the calculation of stresses on the pipeline system embedded on a flexible substrate which is burdened by a landslide. As well as taking into account the probability of the influences acting...
Study on Breaking Load of Single Lap Joint Using Hybrid Joining Techniques for Alloy Steel AISI 4140 and Mild Steel: Taguchi and Neural Network Approach
The present investigation carried out to analyze the breaking load of single lap joint using hybrid joining techniques for alloy steel AISI 4140 and mild steel as base material by experimentally and optimized by Taguch...
OPTIMIZATION OF WELDING PROCESS USING A GENETIC ALGORITHM
Welding is a complex technological process in which local heating takes place up to the melting point of the connecting and the additional material. Phase and crystallization processes are a strong non-linear function...
Analysis of the Effect of the Addendum Modification Coefficient for Contact Surfaces of Spur Gear
The spur gear is widely used in many types of machines and appliances that is why the research of the connection analysis of them (Tooth Contact Analysis, TCA) is very important because of the development of these gear...
Influence of in-Plane Deformation in Higher Order Beam Theories
Comparing Euler-Bernoulli or Tismoshenko beam theory to higher order beam theories, an essential difference can be depicted: the additional degrees of freedom accounting for out-of plane (warping) and in-plane (distort...