Effect of Outrigger Structural System on Highrise Structures, Subjected to Lateral Loads
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 6
Abstract
There are several factors which have made it compulsory for our nation and the world to go for highrise structures and the skyscrapers. One of such factors is rapidly increment in population in urban areas. But it is a big challenge to build a highrise structure as number of aspects to be considered in it are more as compared to lowrise structures such as lateral stability. To deal with the lateral (wind and earthquake) froces acting on a structure, several lateral force resisting systems have been introduced such as the Braced tube, Shear wall frames, Diagrid, Space truss and Outrigger structural system etc. In this paper, the most effective outrigger structural system i.e. conventional outrigger-belt truss is compared with Virtual outrigger System. Also, Concrete and steel are used to carry out the comparative performance of materials for outrigger. Virtual Outrigger while eliminating the disadvantages occurring by Convectional outrigger, has proved itself to be the most effective among all other types of outrigger system, in all aspects.
Authors and Affiliations
Iqra Bano Ayaz Ahmad Khan, Prof. N. G. Gore
Keywords
Related Articles
- EP ID EP438858
- DOI 10.9790/1684-1506012232.
- Views 79
- Downloads 0
An Experimental Study on Strength of Concrete with Partial Replacement of Fine Aggregate with Recycled Crushed Brick Aggregate and Quarry Dust
This project is done to reduce the use of Natural aggregates by replacing it with Recycled Crushed Brick Aggregate (RCBA) and Quarry Dust (QD).The reduction in the sources of natural sand and the requirement for reductio...
Strength of CFST at Elevated Temperature
This paper deals the strength behavior of concrete filled steel tubes at elevated temperature. The main purpose of such a research is to figure out the significance of various structural parameters on the strength of CFS...
A Study on Suitability of Recycled Polyethylene Terephthalate for 3D Printing Filament
This paper presents a novel 3D printing technology using recycled polyethylene terephthalate (PET) to produce a 3D printing filament. The commonly used 3D printing filaments are acrylonitrile butadiene styrene (ABS) and...
Optimization of Printing Press Operations
Printing technology has seen technological advances in the field of automation because it is a very dynamic and innovative process. A good printing factory layout maximizes production with minimum investment in new equip...
Experimental Study of Effect the Load Applied and Length of Adiabatic Section on the Performance of the Wicked Horizontal Heat Pipe.
An experimental study is carried out to evaluate the thermal performance of wicked horizontal heat pipe (WHHP).R134-a is used as working fluid with mass 123 gram. The WHHP was made of three parts condenser, evaporator an...