Electric drive dynamic performance providing based on a rolling rotor motor
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2015, Vol 42, Issue 1151
Abstract
Main factors affecting the value of rolling rotor motor torque, taking into account the distribution of the magnetic induction in the air gap of the contact point of the rotor and stator are represented. Ways for increasing of rolling rotor motor torque to improve its dynamic performance are selected. The control scheme of rolling rotor motor windings switching with the usage of microprocessor coil current control are developed. An experimental research of rolling rotor motor control system with different modulation types and control pulses forms was carried out. That let to improve an electric drive dynamic and raise the rolling rotor motor torque on 18 %.
Authors and Affiliations
G. V. Kulinchenko, A. M. Masliennikov, V. A. Bahuta, O. O. Duniev
Keywords
Related Articles
- EP ID EP408837
- DOI -
- Views 109
- Downloads 0
Development latch short-circuit for overhead power line voltage of 110 - 150 kV
Proposed a simple design of electromechanical latch short-circuit for overhead power line voltage of 110-150 kV. For the selected constructions shows a method of calculating its technical characteristics. Experimentally...
Analysis of the thermal state of various modifications of the mining traction motor DC type ДТН-45/27
Purpose. Studies were made of the possibilities of increasing the hourly power of traction motors of direct current type ДТН-45/27. Methodology. Physical simulation of the DC motor was made to determine the influence of...
Analysis of a microprocessor terminal of a control cabinet for underground railway tubes heating
Analysis of the functions of the microprocessor of the terminal, the peculiarities of the four analog current inputs and four analog input voltage devices 7SJ624 and 7SJ64. Outlined the features of digital inputs and out...
Requirements for contact materials of switching devices
It is proposed to move from use in the construction of high-current electrical apparatus of copper alloys as electrical contact materials to powder materials. An analysis of the composition of the powder material is pres...
An analysis of transient modes of a switch reluctance motor at operation in regime of starting
The question of analysis of influence of law of change of control parameters on the character of transients in the mode of starting of a Swithed Reluctanse Motor of a miner electric locomotive by means of models develope...