Electrocardiogram (ECG) Signal Modeling and Noise Reduction Using Hopfield Neural Networks
Journal Title: Engineering, Technology & Applied Science Research - Year 2013, Vol 3, Issue 1
Abstract
The Electrocardiogram (ECG) signal is one of the diagnosing approaches to detect heart disease. In this study the Hopfield Neural Network (HNN) is applied and proposed for ECG signal modeling and noise reduction. The Hopfield Neural Network (HNN) is a recurrent neural network that stores the information in a dynamic stable pattern. This algorithm retrieves a pattern stored in memory in response to the presentation of an incomplete or noisy version of that pattern. Computer simulation results show that this method can successfully model the ECG signal and remove high-frequency noise.
Authors and Affiliations
F. Bagheri, N. Ghafarnia, F. Bahrami
Keywords
Related Articles
- EP ID EP88989
- DOI -
- Views 306
- Downloads 0
An Investigation of the Effect of Different Nanofluids in a Solar Collector
In this article, we examine the use of different nanofluids in a solar collector in a parabolic form. Temperature, thermal efficiency and outlet average temperature for a conventional parabolic collector and a collector...
The Effect of Multipath on Single Frequency C/A Code Based GPS Positioning
The differential GPS (DGPS) technique is one of the most popular and comparatively accurate techniques available to enhance the positioning accuracy by minimizing most of the common errors. However, the ultimate accuracy...
Experimental Study of an Air Lift Pump
In this investigation the effect of submergence ratio and air jacket on the performance of the air lift pump has been studied. Three types of air jackets in addition to five levels of submergence ratios were used. Each a...
Surface Discharges and Flashover Voltages in Nanocomposite XLPE Samples
DC cable insulation is a field of intensive research activity. Special attention is being given to polymer nanocomposites, as promising insulation for such cables. Relatively little is known regarding surface discharges...
Prediction of Springback in the Air Bending Process Using a Kriging Metamodel
This paper addresses the use of the kriging‏ approach to predict the springback in the air bending process. The materials and the geometrical parameters, which significantly affect the springback, were considered as inpu...