Enrichment of 8-125 mm Colemanite Ores via NIR/CCD Optical Sorter
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 2
Abstract
In this study, 8-125 mm Simav Ana Damar (SAD), Simav Tali Damar (STD) and Tülü Sarı (TS) raw colemanite ores which extracted together with the minerals such as clay, tuff, limestone from the quarries of Bigadiç Boron Works Management of Eti Maden enriched by optical sorters used with near-infrared (NIR) and visible light (CCD) sources. In these works, the ore passing through the crushing, sieving and washing processes was fed to two optical sorters of 8-25 mm and 25-125 mm grain sizes and the 3.90-9.10 units enrichment was obtained in the ores fed at 22.10-39.30% B2O3 content. After enrichment made with over 93% yield, waste was found to be in the range of 2.20-11.10% B2O3 grade.
Authors and Affiliations
Mustafa BARIŞ, Fazlı C. METİN, Nurtaç K. KARABULUT, Fatih ÖZYÜCEL
Keywords
Related Articles
- EP ID EP490315
- DOI 10.29109/http-gujsc-gazi-edu-tr.344767
- Views 97
- Downloads 0
Determination of Production Control System for Virtual Cellular Manufacturing System
Virtual cellular manufacturing system (VCMS) allows production system to accept a new type of product and copes with fluctuations in demand. Therefore, it offers opportunities for manufacturing firms by designing the cel...
Obtaining of Frequency and Voltage Dependent Resistance and Interfacial States Distribution Profiles on Au / (PrBaCoO nanofiber) / n-Si Structures With Different Methods
In this study, the density of interface states (NSS) and series resistance (RS) were examined for both frequency and voltage in PrBaCoO-nanofiber interface layered metal-semiconductor (Au/n-Si) structures. For this purpo...
Water Filter Design with a New and Innovative Conceptual Design Process Model
Conceptual design is the most important phase of engineering design process and the product cost is significantly determined at this phase and it has a direct effect on product innovation. However, academic and commercia...
Structural and Mechanical Properties of Nanocrystalline Fe60Al30Cu10 (at.%) Powders Prepared by Mechanical Alloying
In the present study, the nanostructured Fe(Al,Cu) solid solution was synthesized by mechanical alloying (MA) process of the elemental powders. The powder mixtures were milled in a planetary ball mill for various periods...
The Effects of Shallow Cryogenic Process On The Mechanical Properties of AISI 4140 Steel
In this study, shallow cryogenic treatments were carried out for various holding time to AISI 4140 steel and the effects of heat treatment parameters on wear behavior, impact strength and tensile strength were investigat...