ENSURING THE STABILITY OF VOLTAGE-TO-CURRENT CONVERTER WITH COMPLEX LOAD

Abstract

In this paper, the method of determining the stability of the voltage-to-current converter (VCC) with complex load, which is built on the DC amplifier with a deep negative feedback (NFB) by current. The feedback signal is formed on precise resistor, which is connected in series with an inductive load. The deep feedback and complex load can cause a violation of the stability of the VCC across the whole dynamic range of operation. Additional complexity to ensure stability of the VCC is provided by complex nature of the load. Outside the range of middle frequencies (over 30 kHz) the transfer coefficient is determined by the inductance of load and by the resistor, which forms feedback signal. The feedback factor stops to be a real value and becomes a complex. The phase of NFB signal voltage begins to change and the NFB effect on providing the specified accuracy and on the speed of the current setting in the inductive load is reduced. Upon reaching the large phase shifts in circuit of the VCC amplifier and inductive load at certain frequencies NFB becomes positive, leading to a significant distortion of the output signal and the deterioration of the basic parameters of the VCC, in the worst case, to the self-excitation. It is shown that the stability of VCC is affected by the gain of the amplifier without accounting the NFB influence, depth of feedback and the inductive load time constant tН. Since the gain of the amplifier without accounting the NFB influence and transfer coefficient of the circuit, – inductive load - NFB signal formation resistor, depends on the frequency, the VCC with a load is analyzed as at least the second-order operating system. This system has a tendency to self-excitation and can only be conditionally stable. The analysis of methods for determining the stability of VCC with deep feedback was carried out. The determination of stability criterions of Mikhailov, Routh–Hurwitz and Nyquist was considered on the real Bode diagrams. It was determined that in order to find the stability margin, the most advisable in practice to apply the Nyquist stability criterion in its graph-analytical implementation.44 The stability of the VCC, which is built using operational amplifiers which are presented by one equivalent RC-circuit, was analyzed. The design method for constructing the total amplitude-frequency characteristic, accounting the parameters of the VCC and inductive load, is given. Two examples of VCC implementation: with low inductance load and with large inductance load, are considered. The analytical expressions for determination of the equivalent frequency poles of the system are presented. There is showed how to choose the shunting resistor to ensure the stability. The dependencies of the amplitude-frequency and phasefrequency characteristics on the shunt resistor of inductive load are illustrated, showing its effect on the stability of the VCC operation, as well as the margin of stability of the phase.

Authors and Affiliations

Yuriy Balanyuk, V. Vasylyuk, Volodymyr Shkliarskyy

Keywords

Related Articles

CRYSTAL STRUCRURE OF THE MIXED RARE EARTH FERRITES Pr0,5R0,5FeO3 (R = Nd, Gd, Tb, Dy, Ho)

The work deals with the study of the phase composition and crystal structure of new mixed ferrites Pr0,5R0,5FeO3 (R = Nd, Gd, Tb, Dy, Ho) obtained by solid state reactions technique. It was established that all samples s...

METHOD OF ESTIMATION OF INDEXES OF EFFICIENCY OF THE RADIO ELECTRONIC COMPLEX SYSTEM MONITORING OF AIR SPACE

In this paper a method for estimation efficiency indexes for algorithm behavior of radioelectronic complex system of airspace monitoring is developed. This method takes into account the structure of radioelectronic compl...

TRANSFER FUNCTION SYNTHESIS FROM THE KNOWN FREQUENCY RESPONSE

The calculation of the coefficients of linear system transfer function with the lumped constant parameters which corresponds to the preset frequency response is present. Calculation of the transfer function on a given fr...

EXCITATION OF BULK ACOUSTIC WAVES BY INTERDIGITAL TRANSDUCER FROM THE SURFACE OF LITHIUM NIOBATE CRYSTALS

The excitation of bulk acoustic waves of the UHF range by interdigital transducer from the XY surface of lithium niobate crystals is considered. Experimental studies were carried out on acoustoelectronic delay lines, in...

COMPLEX OPTIMIZATION METHOD OF ROUTING INFORMATION FLOWS IN SELF-ORGANIZED NETWORKS

Modified routing algorithms are presented based on basic meta-heuristic algorithms: ant colony optimization, genetic and simulated annealing to determine the best route for information flows in self-organized networks. A...

Download PDF file
  • EP ID EP459718
  • DOI -
  • Views 118
  • Downloads 0

How To Cite

Yuriy Balanyuk, V. Vasylyuk, Volodymyr Shkliarskyy (2014). ENSURING THE STABILITY OF VOLTAGE-TO-CURRENT CONVERTER WITH COMPLEX LOAD. Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації", 796(2014), 43-48. https://europub.co.uk/articles/-A-459718