Establishment of Prediction Model of Microstructure and Properties of 3003 Aluminum Alloy during Hot Deformation
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 4
Abstract
The 3003 aluminum alloy was deformed by isothermal compression in the range of deformation temperature 300 – 500 ℃ at strain rate 0.0l – 10.0 s-1 with Gleeble-1500 thermal simulator. A constitutive equation is established from the flow stress of the hot deformation. It is found that the average grain size of the 3003 aluminum alloy increases with the decrease of Zener-Hollomon (Z) value, and there is a linear correlation between them. The prediction model of the steady-state flow stress and the average grain size is established. The steady-state flow stress increases with the decrease of the average grain size. The microhardness of the 3003 aluminum alloy has a positive linear relationship with lnZ, and the relationship between the microhardness and the grain size meets the Hall-Petch equation, which can provide a reference for the microstructure control and rolling equipment selection of the 3003 aluminum alloy under hot deformation conditions.
Authors and Affiliations
Guiqing CHEN, Gaosheng FU, Tianyun WEI, Chaozeng CHENG, Huosheng WANG, Lili SONG
Keywords
Related Articles
- EP ID EP674673
- DOI 10.5755/j01.ms.25.4.19436
- Views 60
- Downloads 0
Using Gold Nanoparticles with Spectroscopic and Analytical Models for Rapid Colorimetric Detection of Mercury Ions in Aqueous Media
In this study, high-sensitively colorimetric detection of mercury ions was developed according to the surface plasmon resonance of modified gold nanoparticles. While in a citrate buffer solution, the selected modifier Bi...
Characterization, Production and Microwave Absorbing Properties of Polyaniline-NiFe2O4: Tb Composites
In this study, terbium-doped NiFe2O4 was produced by using mixed oxide technique. The Ni1-xTbxFe2O4 composition was synthesized and x was selected as 0.025, 0.050 and 0.070, respectively. The single phase Ni ferrite was...
Biodegradation of Wood Treated with Copper Based Preservative by Two Dematiaceous Fungi: Alternaria Tenuissima and Ulocladium Consortiale
As cases of treated wood colonization by fungi still happen, the understanding of fungal survival abilities could contribute in the creation of new efficient preservatives. For that reason, two dematiaceous fungi Alterna...
Effect of Annealing Temperature on Structural, Morphological, Optical and Electrical Properties of Spray Deposited V2O5 Thin Films
Nanostructured vanadium pentoxide (V2O5) thin films have been deposited by a simple and cost-effective spray pyrolysis technique (SPT) at substrate temperature 300 °C and post annealed at atmospheric conditions in the te...
Microstructure and Magnetic Studies of La1-xSrxFeO3 Nano Particles Fabricated by the Citrate Sol-Gel Method
The paper reports the use the sol-gel auto-combustion method for the preparation of nanocrystalline La1-xSrxFeO3 (x = 00.7). The physical and chemical properties, microstructure, morphology and magnetic properties of th...