ESTIMATION OF THE WEAR MECHANISM IN SLIDING CONTACT OF SATELITE GEARS OF A HYDRAULIC MOTOR
Journal Title: Tribologia - Year 2018, Vol 279, Issue 3
Abstract
The paper presents tests of the wear of selected elements of a hydraulic satellite engine in sliding contact. The tests were carried out on the tribotester T-05 in a roll-block system, taking into account the influence of the most important operational parameters determining the durability of the friction node in question. The performed tribological, metallographic and profilographometric studies allowed the comparison and evaluation of the mechanism of sliding contact wear in the laboratory stand and on the real object, which allows one to make far-reaching assumptions about the durability of the contact in question and its resistance to wear under various operating.<br/><br/>
Authors and Affiliations
Henryk BĄKOWSKI
Keywords
Related Articles
- EP ID EP403170
- DOI 10.5604/01.3001.0012.7001
- Views 35
- Downloads 0
THE TESTING OF EXPLOITATION PROPERTIES OF ECOLOGICAL GREASES MODIFIED WITH POLYMER-SILICA ADDITIVE
In this article, the investigation results of the influence of developed additive AR (silica and polymer) on the change of rolling contact fatigue bearings lubricated with an ecological composition of grease are presente...
THE TRIBOLOGICAL PROPERTIES OF THE Ti6Al4V ALLOY WITH NITROGEN ION IMPLANTATION
The article presents the analysis of the influence of ion implantation on the properties of titanium alloy used in biotribological systems. The object of the study was the titanium alloy Ti6Al4V implanted with nitrogen i...
EVALUATION OF SELECTED PROPERTIES OF A SURFACE LAYER AFTER MILLING USING INSERTS WITH DIFFERENT COATINGS
The article presents a comparison of results of measurements of the geometrical structure of milled surfaces with inserts with different coatings. The study was done on a vertical milling centre. The first step was to de...
Analiza teoretyczno-eksperymentalna zmienności siły osiowej w połączeniach śrubowych
Przedstawiono dwie analizy rozrzutu wartości zacisku wstępnego w śrubie podczas montażu połączeń śrubowych. Analiza teoretyczna oparta jest na zmienności współczynnika tarcia, nawet dla tego samego rodzaju materiału śrub...
The effect of zinc dithiophosphates on the friction and wear of partially stabilized zirconia. Part I. Zinc DI-N-alkyldithiophosphates tribological properties
Tribological properties of zinc di-n-alkyldithiophosphates (ZDTPs) of ionic-ZrO2, partially stabilised by Y2O3 (PSZ), were performed using a ball-disk tribometer, at 25°C. It was found that ZDTPs significantly reduce the...