EVALUATION OF BOND QUALITY AND CORROSION RESISTANCE OF STAINLESS STEEL-LOW CARBON STEEL FRICTION SURFACED DEPOSIT
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
Friction surfacing is an advance surface modification process and it is solid phase welding technique by means of which similar and dissimilar metals easily be deposited one over the other effectively. This process preferable to get some special properties for the surfaced deposits of mechanical properties such as, shear strength or tensile strength, chemical resistance, wear resistance, corrosion resistance and electrical properties. In this study, details of the variants of friction surfacing techniques, the weldability of the stainless steel with the low carbon steel, selection of process parameters to get the desired properties, a deposit of corrosion resistance, mechanical testing of deposits and industrial applications are discussed in detail. By designing 23 experiments, the optimum parameters required for obtaining the desired responses of properties of bond strength, such as tensile strength and shear strength, surface roughness, width and height were determined. Also discussed are the effects of the parameters on the properties. The results of the corrosion test are discussed with applications like chemical pumps, pressure vessels and joining of dissimilar metals. Friction welding process has been commercialized in view of its importance and applications in defense, aerospace, electrical, automobile and many other industrial sectors
Authors and Affiliations
Keywords
Related Articles
- EP ID EP377093
- DOI -
- Views 58
- Downloads 0
The Effect of Temperature and Thermodynamics Studies on The Removal of Heavy Metal by using Adsorbent
The need for waste water treatment has intensified in the recent past with the advent of industrial revolution. The major contaminants of water are heavy metals of which chromium, used in leather and electroplating indus...
Computational Analysis of Passive Cooling Technique Applied to A Room Under Naturally Induced Flow
In 21st century, the global warming has become great threat to mankind. The Air Conditioner became mandatory for room cooling in all the households which releases poisonous gases like CFCs and CO2 and also depends on ele...
Investigation of the Effect of Minimum Quantity Lubrication (MQL) on the Machining of Titanium and its Alloys A Review
In this study, machinability studies of Titanium (Ti) and its alloys construction, under the minimum quantity lubrication (MQL) system has been investigated. Titanium and its alloys, which are made of lightweight metals,...
Design and Modeling Studies of Tube End Expansion using Response Surface Methodology
The production of various profiles on the ends of the tubes is referred as tube end forming process. In the present work, the elevated temperature forming studies have been performed. The thin walled tubes have been subj...
A Review on Acoustical Properties Measurement Methods and A Proposed Novel Method for Acoustical Characterization of Laminated Glass used in Automotive Applications
Many-a-time, deviation of attention of driver due to excessive noise is among the major factors responsible for accidents, and 54.3 dB of the sound between 500 to 5000 Hz is the high noise transmitted to the driver among...