Evaluation of Tear Strength of Two Types of Iralgin and its Comparison with Similar Alginate Impression Material

Abstract

Objectives: Among the various impression materials, for alginate tear strength is probably more important than the compressive strength. The tear strength is important when an impression involves a mechanical undercut and/or lacks bulk strength to resist tearing. This study evaluated tear strength of Iralgin and compared it with tear strength of Alginoplast. Methods: In this invitro experimental study A mold was made with 100mm×20mm×1mm dimensions and a longitudinal prominence in 0.3 mm depth. Twenty–seven specimens (9 Super Iralgin, 9 Pocket Iralgin, and 9 Alginoplast) were selected non–randomizedly. Each specimen prepared corresponding to manufacturer and injected into the mold. And the mold was placed under press. After removing the mold from press, every specimen formed as a trouser-shaped specimen. The specimen was pulled in tensile machine with 50 mm/min speed. The data of specimens in different groups were statistically analyzed using one-way ANOVA, Kolmogorov-Smirnov, and Levene's tests. Results: Mean of tear strength in first specimen (Super Iralgin), second specimen (Pocket Iralgin), and third specimen (Alginoplast) were 640±38 grf/cm², 500 ±20grf/cm², and 1100±27 grf/cm² respectively. According to ANOVA test, the mean of tear strength was not equal in three specimens (p<0.01). According to LSD Multiple Comparison, the first and second specimens were same in tear strength, whereas the third specimen was different from the two former (p<0.05 and p<0.01). Conclusion: Super Iralgin and pocket Iralgin were the same in tear strength. Alginoplast was significantly higher than super and pocket Iralgin in tear strength.

Authors and Affiliations

Amir Fayaz, Abolghasem Noori

Keywords

Related Articles

Assessment of the Inferior Mandibular Canal’s Position by Cone-Beam Computed Tomography

Objectives: It is important to know the exact location and anatomic variety of inferior alveolar nerve canal for different procedures of mandibular surgeries. The aim of the present study was to evaluate inferior mandibu...

School-Based Oral Health Promotion: A Thorough Review

Objectives Schools are considered as important platforms for oral health promotion worldwide. Oral diseases are preventable and any focus on schoolchildren can minimize suffering, reduce inequity, and create productive y...

Comparison of the Efficacy of Digital Caliper and a Newly Designed Digital Bone Gauge for Measurement of Edentulous Alveolar Ridge Width

Objectives: An efficient, safe, affordable and easily accessible measuring instrument for quantitative assessment of bone prior to dental implant placement enables more accurate treatment planning. Costly imaging modalit...

Comparison of Compressive Strength of Five Hydraulic Cements

Objectives: Maintaining pulp vitality is a main goal in restorative dentistry. Introduction of pulp capping agents paved the way to eliminate the shortcomings of these materials and obtain successful restorations. On the...

Comparison of the Effect of Ball and Bar Attachment Designs on Retention and Stability of Mandibular Implant-Supported Overdentures

Objectives: The present study evaluated the effect of bar and ball attachment designs on retention and stability of a mandibular overdenture supported by four implants. Methods: An edentulous mandibular acrylic resin mod...

Download PDF file
  • EP ID EP371664
  • DOI -
  • Views 65
  • Downloads 0

How To Cite

Amir Fayaz, Abolghasem Noori (2016). Evaluation of Tear Strength of Two Types of Iralgin and its Comparison with Similar Alginate Impression Material. Journal of Dental School Shahid Beheshti University of Medical Sciences, 34(1), 15-18. https://europub.co.uk/articles/-A-371664