Evaluation of The Operation and Improvement of the Stability of the Factory Power Network, Taking into Account the Uncertainty of the Network Model Parameters
Journal Title: Acta Energetica - Year 2017, Vol 30, Issue 1
Abstract
There was analysed the operation of a factory power network working in island mode and cooperating with the Polish National Power System (PNPS) in selected transient states. It was assumed that two generating units: one with an asynchronous generator, and the second with a synchronous generator, were installed in the network. The behaviour of the generating units was analysed in the following transients: transition of the factory network from cooperation with the PNPS to island mode operation and shutdown of the asynchronous unit. The analysis took into account the uncertainty of the parameters of selected models of network elements. In the paper, there is described the problem of modelling the scatter of parameters of the models of electrical systems. It consists in determining the envelopes (limit bands) for a family of waveforms of the analysed signals. These envelopes were determined using multiple simulations when changing the network model parameters in an appropriate manner. There is shown the possibility of improving the angular stability of the analysed network by the use of stabilising systems with an appropriate structure and optimised parameters. It is proposed to introduce these stabilising systems to the turbine governor and the synchronous generator excitation system. Parameters of the stabilising systems were optimised by minimising the defined quality factor of electromechanical control waveforms in the selected transient state. A genetic algorithm was used to minimise this quality factor.
Authors and Affiliations
Adrian Nocoń, Stefan Paszek, Janusz Walczak
Keywords
Related Articles
- EP ID EP198024
- DOI 10.12736/issn.2300-3022.2017107
- Views 39
- Downloads 0
Influence of Power Converters on Increasing the Share of Renewable Energy Sources
The article shows various configurations of the topology of grid converters with their control systems, tailored to the needs of the energy market and regulations. Power electronic systems are used for the integration of...
Design of Transformers
In this paper the basic designing of high voltage power transformers has been described. The layout and construction of a high voltage and low voltage winding of transformers has been determined. The designing of a tank...
The use of Small Scale Inverters Working with Renewable Energy Sources in Order to Improve Voltage Quality in a Power Distribution Network
The paper presents the results of a research project aimed at the construction of a single-phase inverter designed to transfer power from renewable energy sources (RES) to an electric power system (EPS). The research con...
Energy Effectiveness and Economic Performance of Gas and Gas-Steam Combined Heat and Power Plants Fired with Natural Gas
The paper presents the energy and economic effectiveness analysis of technological systems of gas and gas-steam combined heat and power (CHP) plants. For the analysis the following five technological systems of gas and g...
Laboratory Power System Model Designed for Testing Dynamic Processes
Identification tests of dynamic and transient processes which occur in a power system are usually based on simulation. Structures of systems used for simulation testing are built from simplified models of power system co...