The Optimal Choice of Electrochemical Energy Storage Parameters
Journal Title: Acta Energetica - Year 2016, Vol 26, Issue 1
Abstract
The possibility of using energy storage in a power system is being highlighted increasingly often. Its operating mode or manner of use is called the “storage usage strategy”. One of them, program operation, was selected for this study. An algorithm of the supervisory control of storage for a chosen strategy is described. Simulation results are presented. The investor may face a dilemma of how to select parameters for the storage operated in a strategy. Based on the simulation results, technical and economic optimisation indicators were determined. A pattern of the selection of total storage capacity for the chosen strategy was developed, taking into account various types of electrochemical storage, with a fixed usable capacity. The considered optimisation problem is to establish a compromise between storage life and its effective use.
Authors and Affiliations
Jarosław Korpikiewicz
Keywords
Related Articles
- EP ID EP199950
- DOI 10.12736/issn.2300-3022.2016105
- Views 57
- Downloads 0
Application of Voltage-regulating and Phaseshifting Transformers to Control Power Flows in the Power System
Transmission system performance results from, among other factors, the use of devices for electricity transmission and transformation. Proper operation and control of these devices allows maintaining proper electricity p...
Influence of Power Converters on Increasing the Share of Renewable Energy Sources
The article shows various configurations of the topology of grid converters with their control systems, tailored to the needs of the energy market and regulations. Power electronic systems are used for the integration of...
Problems of Selecting Protection for Shunt Reactors Working in Extra-High Voltage Grids
This paper presents difficulties encountered when designing protection devices for shunt reactors connected directly to extra-high voltage grids. Using the example of the 400 kV Ełk Bis substation, it has been demonstrat...
Laboratory Load Model Based on 150 kVA Power Frequency Con-verter and Simulink Real-Time – Concept, Implementation, Experiments
First section of the paper provides technical specification of laboratory load model basing on 150 kVA power frequency converter and Simulink Real-Time platform. Assumptions, as well as control algorithm structure is pre...
Testing Situation Awareness Network for the Electrical Power Infrastructure
The contemporary electrical power infrastructure is exposed to new types of threats. The cause of such threats is related to the large number of new vulnerabilities and architectural weaknesses introduced by the extensiv...