EXPERIMENTAL AND SIMULATION MODELING OF THE HEAT EXCHANCHE PROCESS WHILE BOILING VEGETABLE JUICE
Journal Title: Прогресивні техніка та технології харчових виробництв ресторанного господарства і торгівлі - Year 2019, Vol 1, Issue
Abstract
The main heat exchange process of the proposed method for the production of concentrated products from vegetable raw materials is boiling in a vacuum evaporator of periodic action with an improved design of the steam mixer. The mixer is a spiral metal tubular design with the ability to pile into its cavity. The dependence of a heat transfer coefficient on the number of turns of the mixer, during the production of separate concentrates from vegetable raw materials is determined. The efficiency of using a device with a simple and reliable construction for mixing and heating viscous food products is proved. Also it helps to reduce the length of the product processing and improve quality of the finished product due to better mixing and intensification of heat transfer process by using spiral metal tubular designs for the supply of coolant, which contributes to the increase of the contact area of the product with heating elements. The scrapers are located on the helix in such a way that they block each other while driving. When rotating the mixer, the scrapers move near the surface of heat exchange wall of the apparatus, forming a screw surface, which facilitates the turbulization of the wall laminar layer of the product, which it prevents from sticking, eliminates stagnant zones, resulting in temperature equalization and uniform flow of the process. As a result of the experiments, dependence of the heat transfer coefficient on the number of revolutions of the developed mixer was investigated, the analysis of which allowed to determine the efficiency of the use of a new design of the mixing device. This became a practical basis for systematic dynamic modeling of temperature field changes during the boiling up of vegetable juice. The simulation results were obtained using Vensim system analysis software. Duration of the actual exit to the stationary mode of heating was controlled experimentally by means of the vacuum evaporator. Comparison of the results of physical and simulation modeling proves the prospect of the crystallization of system analysis tools for the study of heat exchange processes.
Authors and Affiliations
Олександр Черевко, Ольга Маяк, Станіслав Костенко, Азіз Сардаров
Keywords
Related Articles
- EP ID EP614094
- DOI 10.5281/zenodo.3263532
- Views 107
- Downloads 0
ВИКОРИСТАННЯ ТРИКОМПОНЕНТНИХ ПЛОДОВО-ЯГІДНИХ НАПІВФАБРИКАТІВ У ТЕХНОЛОГІЇ МАРМЕЛАДНИХ ВИРОБІВ
Сьогодні в населення України спостерігається підвищення попиту на продукти для здорового харчування, виготовлені з натуральних інгредієнтів. Тому актуальним завданням є вдосконалення існуючих технологій, зокрема мармелад...
IMPLEMENTATION OF INNOVATIVE APPROACHES TO LEARNING WITH THE USE OF INFORMATION AND COMMUNICATION TECHNOLOGIES
Development and introduction of the innovative approaches to learning for upgrading education, preparation of highly skilled specialists is one of most issues of the day, which stand before the system of modern education...
ВПЛИВ ФОРМИ ЕЛЕКТРОДІВ І РЕЦЕПТУРНИХ КОМПОНЕНТІВ НА ЕЛЕКТРОПРОВІДНІСТЬ ДРІЖДЖОВОГО ТІСТА
Запропоновано принципово новий метод визначення характеристик пористої структури тіста, заснований на вимірюванні сили змінного електричного струму. Проведено порівняння різних видів електродів: у вигляді плоских пластин...
NEW KIND OF SPREAD WITH THE INCREASED BIOLOGICAL VALUE
Analysis of modern trends in the manufacture of the combined fatty products showed that during the manufacture of spreads the potential of raw material rich in biologically active substances is used insufficiently. Produ...
RENEWAL OF PORES DISTRIBUTION IN LEATHER PRODUCTS
The questions concerning the possibility of a complete curve f(r) volumetric differential distribution of pores according to the experimentally found part of the distribution curve for large radii of pores are considered...