Experimental Investigation of Thermal Efficiency of Boiling Pot with Modified Surface Geometry
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
The research investigates the feasibility of a boiling pot with modified bottom surface as an efficient way compared to the boiling pot with a flat bottom. The effects of multiple vertical tubes along with modified bottom pot surface on heat transfer are also investigated experimentally. There are five types of pots used during the experiments. The first one is of flat bottom; the others are of different modified bottom with vertical tubes. Water boiling test (WBT) is used to calculate the thermal efficiency. The results obtained from the modified cooking pot are compared with the unmodified flat bottom cooking pot. The pots with modified bottom with vertical tubes give 25-29% higher efficiency than that of the flat bottom pot. Also in case of modified pots the boiling point is reached at a lesser time compared to that of flat bottom. The results of this study are of technological importance for the efficient design of domestic cooking pots to enhance performance
Authors and Affiliations
S. S. SINGH, K. B. SAHU, A. K. ROUT
Keywords
Related Articles
- EP ID EP279948
- DOI 10.24247/ijmperdfeb2018053
- Views 91
- Downloads 0
Study of Mechanical Properties of Open Cell AL6061 Alloy Foam
The mechanical behavior of 20 ppi open cells Al6061 alloy foam is studied under uniaxial tensile, compression and bending loads. In addition to the common stress–strain measurements, peak load, ultimate stress, displacem...
Analysis of Fuzzy Soft Set Compositions for Allocating Jobs To Machines in Fuzzy Environment
Real world situation often exist with high degree of uncertainty in decision making. In such situation, decision makers can use fuzzy soft set which is a mathematical tool for dealing with uncertainties and has rich pote...
EFFECT OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF AL2011 BASED COMPOSITES FOR TITANIUM DI BORIDE USING STIR CASTING METHOD
Objectives Al-2011 base composite reinforced with TiB2 salts was successfully manufactured by the stir-casting technique. Conversion of the matrix with the inclusion of copper and titanium improved the mechanical propert...
Performance Improvisation and Mathematical Modelling of Hardness of Tube Tex Roller Used in Textile Industry
The tTextile industry is a rapidly growing industry and seen many innovations to till date. One of the widely used machines in this industry is the Tube Tex compacting machine. It is used to remove the shrinkage in the f...
Modalities of Diagnosis & Management of Small Blue Round Cell Tumor
The small blue round cell tumour is a group of a malignant neoplasm. Sino-nasal area is a very rare site for this tumour. This case of Sino-nasal small blue round cell tumour which is reported for the first time from our...