WING STRUCTURAL ANALYSIS USING DIFFERENT FIBER REINFORCED COMPOSITES AND HYBRID COMPOSITES
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
Modeling the wing in ANSYS Mechanical APDL using working model parameters and applying the loads accordingly. The idealization of the wing and all its structural components to a single wing element. Obtaining the results and comparing them. In this project, we are considering different composite materials and their properties. The wing model is generated and meshed to produce required elements and nodes. The Loads are applied accordingly with reference to the working model. When the solution is done, the stress intensity and Von Mises stress of the model for a concern composite is obtained and the same is done for different composites. After obtaining the results, we compare the properties. In this project, we are comparing only stress of the component.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP376998
- DOI -
- Views 73
- Downloads 0
Energy Potential of Sugar-Mill Byproduct Press-Mud Through Pyrolysis Process
Press-mud is the sugar industry left-over produced from the filtration of the sugar cane juice during the production of sugar. At present, it is a good source of fertilizer and utilized in soil quality enhancement in Ind...
Fabrication and Charecterisation of Aluminum-Graphite Composite Material
Matel matix composites have better properties and performance, compared to the pure metals that justifies their added cost. The present work includes fabrication of metal matrix composite having Aluminium as a base metal...
Multi Objective Optimization of Laminar Mixed Convective Heat Transfer of Electronic Chips in A Horizontal channel with Vortex Generator
This paper represents laminar mixed convective heat transfer in a channel (horizontal) including five electronic chips mounted on the bottom wall with a vortex generator (triangular bar), VG and is carried out in order t...
Mechanical Failure Analysis of a Rake Unloading System using FTA and FMECA
Iron and Steel industries, raw materials are mostly transported, through the railway rakes. The railway provides some stipulated free time, for unloading the rakes and charges a penalty for the delay beyond the free time...
A Study on the Effects of Heat Treatment on the Mechanical Properties of Aluminium Alloy (ADC 12) Reinforced With Iron Oxide (FE2O3)
The mechanical properties of an Al–Si–Cu alloy (ADC12) reinforced with iron oxide, produced using different Heat treatment to process is examined experimentally. Experimental studies were carried out for ADC 12, ADC 12 +...