Experimental Investigation on Characteristic Study of the Carbon Steel C45 in Different Working Conditions Using Toughness Test

Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2015, Vol 5, Issue 4

Abstract

In this paper, the mechanical characteristics of C45 medium carbon steel are investigated under various working conditions. The main characteristic to be studied on this paper is impact toughness of the material with different configurations and the experiment were carried out on charpy impact testing equipment. This study reveals the ability of the material to absorb energy up to failure for various specimen configurations under different heat treated conditions and the corresponding results were compared with the analysis outcome.

Authors and Affiliations

R. Raj Mohan , P. Arul Solomon , A. S. Bhuvanesh Kanna , C. Giridhar Chellappa , J. Jaganraj

Keywords

Related Articles

 Low Bit Rate Design and Implementation of BPSK Demodulation on FPGA

 This paper présents extended Works on BPSK Modulation at Low Bit Rate and also presents Simulation results and FPGA implementation of BPSK demodulation at Low Bit Rate 1200 bits/second on Altera Stratix III Dev...

 Characterization, Classification and Standardization of Fly Ash of Kosovo Lignite-Fired Power Stations as Industrial Construction Product

Kosovo generates around 6000 GWh of electrical energy annually. Over 97% of this is produced by lignite-fired power-plants and less than 3% by hydro-plants. The lignite combustion, around 8 Mt/a, besides the emission of...

Turnstile S-Shaped Dipole and Swastika Wire Antennas for VHF and UHF Applications

New wire antennas are proposed, namely turnstile S -Shaped dipole and Swastika wire antenna. The radiation characteristics are obtained using the method of moments (MoM) with one-volt delta gap source and suitable dimens...

 Greedy – based Heuristic for OSC problems in Wireless Sensor Networks

 This paper contains optimize set coverage problem in wireless sensor networks with adaptable sensing range. Communication and sensing consume energy, so efficient power management can extended the network lifet...

MCDM Techniques for the Selection of Material Handling Equipment in the Automobile Industry

Material Handling Equipments are utilized in different shops of an automobile industry. For culling congruous Material Handling Equipment, it is felt that some Multi Criteria Decision Making Methods must be use...

Download PDF file
  • EP ID EP89369
  • DOI -
  • Views 132
  • Downloads 0

How To Cite

R. Raj Mohan, P. Arul Solomon, A. S. Bhuvanesh Kanna, C. Giridhar Chellappa, J. Jaganraj (2015). Experimental Investigation on Characteristic Study of the Carbon Steel C45 in Different Working Conditions Using Toughness Test. International Journal of Modern Engineering Research (IJMER), 5(4), 1-6. https://europub.co.uk/articles/-A-89369