EXPERIMENTAL RESEARCH OF THE INFLUENCE OF APPARATUSES WITH COUNTER SWIRLING FLOWS ON THE EFFICIENCY OF COLLECTION
Journal Title: Прогресивні техніка та технології харчових виробництв ресторанного господарства і торгівлі - Year 2015, Vol 2, Issue
Abstract
In Sumy National Agrarian University, an experimental stand apparatus was mounted to study colliding with twisted threads. The stand complies with the requirements adopted for these "the only method" tests. The above method is available for use and allows you to get objective importance in determining the basic parameters of the tested devices, including devices with counter twisted threads. The proposed pilot examines overall efficiency of vehicles colliding with twisted streams (AZZP) using software for image analysis. All experiments were performed 5 times. The disagreement results did not exceed more than 5%. For the next series of experiments, the stand was remounted in other experimental conditions. Therefore, using this stand, such experimental researches were carried out: determination of aerodynamic characteristics of dusty air streams; determination of the overall efficiency of vehicles colliding with twisted flows before and after improvement; determination of pressure losses in apparatuses. When the held five times experiments were over, the frequency for each unloading hopper AZZP was made, bringing the three samples obtained involved product. These samples were tested for particular composition using scanning electron microscope with low vacuum camera SEM-106 I. Before the study, a number of dry particles coated with a disposable adhesive on both sides, adhesive tape, and then stuck to the Petri dish. Then each film was sprayed with silver at the Institute of Applied Physics via VUP-5M (vacuum universal post), after which they were transferred to the SEM sample holder pre blurry Aquadag (carbohydrate pasta). It should be noted that during the treatment dry particles to form agglomerates sought, because of their large water absorption, because X-rays often generated inside the sample, which was 10 microns at the point of falling electron beam. In particular cases, for particles up to 10 microns, x-ray radiation caused fluorescence in the sample holder REM, which led to undesired radiation. The method of benchmarking units with counter flow curled to perfection even after the improvement. The minimum fraction captured dry product, which constituted 1.99 microns of trapped particles – after the improvement in AZZP (single cone)
Authors and Affiliations
Марина Савченко-Перерва
Keywords
Related Articles
- EP ID EP183518
- DOI -
- Views 95
- Downloads 0
ДОСЛІДЖЕННЯ ЯКІСНИХ ХАРАКТЕРИСТИК ПРОЦЕСУ УЛЬТРАФІЛЬТРАЦІЇ З ВИКОРИСТАННЯМ БАРБОТУВАННЯ НЕЖИРНОЇ МОЛОЧНОЇ СИРОВИНИ
Розглянуто питання використання мембранних процесів у харчовій промисловості під час обробки нежирної молочної сировини. Подано результати дослідження з визначення показників якості нежирної молочної сировини під час її...
RESEARCH OF LYSIS OF LACTIC ACID BACTERIA CELLS UNDER THE ACTION OF PROTEOLYTIC ENZYMES
The expediency of destroying of lactic acid bacteria cells has been substantiated in order to obtain powerful immunotropic compounds – low molecular weight peptides of the muamilpeptide series. Characterization of substr...
THE NEW IN FREEZING TECNOLOGY OF CHLOROPHYLL-CONTAINING VEGETABLES WITH RECORD CHARACTERISTICS
Developed cryogenic technology frozen chlorofill-containing vegetables (broccoli and Brussels sprouts), which includes cryogenic "shock" freezing with high speeds and to lower the final temperature in products using liqu...
QUALITY OF PORK PROCESS BY "TERNOPILSKIY MEAT-PACKING FACTORY" LLC
The actual tasks facing the meat industry are the rational use of meat raw materials with different technological characteristics and improving the quality of products that are produced. Today, in the world market of mea...
ДОСЛІДЖЕННЯ ПРОЦЕСІВ КОМБІНОВАНОГО СПОСОБУ ОЧИЩЕННЯ ПЛОДІВ ГАРБУЗА
Проаналізовано основні поширені способи очищення гарбуза від насіння та шкірки, виявлено низку недоліків та запропоновано шляхи вирішення проблемних питань. Запропоновано використання комбінації процесів теплової та меха...