Experimental Study on Cleaning Device of Peanut Pods
Journal Title: 河南科技大学学报（自然科学版） - Year 2018, Vol 39, Issue 2
Abstract
The peanut pods cleaning device was mainly composed of collecting light impurities device and separating stems device.The former used the cross-flow fan to remove light impurities from the peanut mixture by inhaling, and the latter used double rollers to separate stems from peanut pods based on the differences between shape and dimension of peanut pods and stems.The peanut pods cleaning device had the advantages of low loss and low impurity rate.A new type of peanut pods cleaning device test-bench was designed based on the above structure and principle. The influence of structure motion parameters on cleaning performance were studied through laboratory test, and the optimal combination of parameters was obtained. The results show that when the cross-flow fan speed is 920 r/min, the distance between sliding plate and fan impeller is 100 mm, the width of discharging exit is 50 mm, the gap between double rollers is 2 mm, the separation roller speed is 300r/min, and the angle between separating device and horizontal plane is 35°, the performance of peanut pods cleaning device is best with the impurity rate of 0.89% and the cleaning loss rate of 0.62%. All of the results meet the requirements of the industry standard.
Authors and Affiliations
Qingxiang SHI, Chunya LIU, Shengsheng WANG, Lingxin GENG, Fang YANG
Keywords
Related Articles
- EP ID EP464694
- DOI -
- Views 60
- Downloads 0
Improved Method for Real-time of MAC Layer in Wireless Sensor Networks
1
Effects of Rutile Particle Size on Microwave Dielectric Properties of Silicone Rubber
Rutile / silicone rubber composites were prepared by filling 107 silicone rubber with micro-and nanorutile particles respectively and by room temperature curing method. The phase composition and microstructure of the cer...
Test of Cold Starting System for Heavy-duty Commercial Vehicle
Aiming at the problems that the data acquisition was not synchronized,the test efficiency was low and the analysis and save of subsequent data were difficult,the scheme of cold start test data acquisition and analysis sy...
Effect of Arc on Tribological Characteristics of C/C Composites Under Electric Current
The friction and wear tests were carried out on an HST-100 high-speed friction and wear testing machine with a pin-on-disc configuration,and the arc images were recorded by a high-speed camera. The effect of arc on the t...
Calculation of Permanent Deformation of Cylindrical Roller Bearings under Overload Condition
In order to solve the overload problem of the operation of aerospace bearing,the contact stress and strain formula in the elastic and plastic stage of cylindrical roller bearing was given based on elastic-plastic mechani...