Fabrication and Properties Evaluation of CNT Polymer Composites
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
In polymer and metal matrix composites that form a strong bond between the fiber and the matrix, the matrix transmits loads from the matrix to the fibers through shear loading at the interface. In component designing, the rapid prototyping technique is utilized to make a 3-D model of an item or part. To extract samples of polymer mix composite recent trends of 3D rapid prototyping machine has been used. The phenomenon of samples preparation is layer depositing also discussed, keeping in mind the end goal to prepare composite filled and carbon material in various structures, Carbon NANO Tube (CNT) item (UPNT) what brought into PP matrix however so Carbon Black (CB) and financially accessible CNT (CN) were utilized. The composite mixing and extrusion percentages are given in terms of volume percentage basis. In the present research two materials PP and ABS taken as polymer materials and minute percentages of 0.1 and 0.2 of CNT mixed. The properties of samples were tested for application sustainability.
Authors and Affiliations
N. CHANDRA SEKHAR REDDY, B. ANJANEYA PRASAD
Keywords
Related Articles
- EP ID EP281439
- DOI 10.24247/ijmperdfeb2018136
- Views 70
- Downloads 0
Enhancement of a Boil-off Gas Re-liquefaction System with Cascade Cycle
For marine use, outward compressors are found just on circulating air through and cooling commitments, as they are not adequately versatile for the extent of working conditions essential for payload operations. However s...
Investigation of Effect of Friction Stir Drilling Parameters on Elastoplastic Behaviour of Al Alloy
The aim of the research work was to investigate on the effect of drilling parameters on ultimate tensile strength of holed specimen. The specimen tested for study to determine the UTS for both conventionally drilled hole...
A Formability of Two Copper-Bearing, Cold Rolled, Box Annealed and Temper Rolled Extra-Deep Drawing Low Carbon Aluminium-Killed Steel Sheets of Nagarjuna Steel Limited (Private, Andhra), and a Comparison with that of a Typical Steel Sheets Made by Bokaro Steel Plant (Steel Authority of India Limited, Ministry of Steel, Government of India)
This market-driven research publication is on the formability of two extra-deep drawing (EDD) steels in whose manufacture scrap addition is present and their chemistry may in turn show the presence of residual copper. It...
Measuring Productivity Index with Objective Matrix (OMAX) Method in the Diecasting Aluminum Industry
Productivity in the manufacturing industry has a very important role, the manufacturing industry must have good productivity, this aims to improve the quality of the company and also increase profits for the company....
Fabrication and Study of Hardness Behavior on Gamma Irradiated Ultra-High Molecular Weight Polyethylene (UHMWPE) Plate
Over the decades, there has been an enormous development in the field of polymers, especially in areas of Ultra-High Molecular Weight Polyethylene. Ultra High Molecular Weight (UHMWPE) Polyethylene materials have excepti...