FACTORS AFFECTING THE FORMATION OF GAS POROSITY IN A356 ALLOY WHEEL BY GRAVITY DIE CASTING
Journal Title: International Journal of Metallurgical & Materials Science and Engineering (IJMMSE) - Year 2018, Vol 8, Issue 4
Abstract
The majority of the defects occur in the in Aluminium alloy casting are due to mold parameters, filling and during solidification. Aluminium alloys form oxide layer on top of the molten metal in holding furnace immediately when it comes in contact with the atmosphere forming oxide on its surface. This oxide layer forms bifilms due to turbulence. This leads the gas to get entrapped in the molten metal causing gas porosity in the casting. The gas entrapped in the casting during filling causes gas porosities during solidification. The study focused on identifying & controlling the parameters affecting formation of gas entrapment while casting A356 alloy wheel using GDC results into formation of gas porosity. Effect of various parameters like, pouring temperature, degassing time and Volume in holding furnace on the formation of porosity was checked for wheel samples and Reduced Pressure Test (RPT) samples.
Authors and Affiliations
ATUL N. MESHRAM . , RAUT D. N, MAHAJAN S. K
FACTORS AFFECTING THE FORMATION OF GAS POROSITY IN A356 ALLOY WHEEL BY GRAVITY DIE CASTING
The majority of the defects occur in the in Aluminium alloy casting are due to mold parameters, filling and during solidification. Aluminium alloys form oxide layer on top of the molten metal in holding furnace immediate...
Microstructure Analysis of Genuine Copper Alloy Coin
Coin characterization analysis (coins) is done by using the test method such as; Spectrometer XRF, XRD Defractometer, Deferential Scanning Calorimeter, Scanning Electron Microscope (SEM). Characterization is done in Lab...
Study on Reduction Kinetics of Iron Ore Sinter Using Coke Dust
Sintering is the most important process where iron ore fines are converted into a suitable lumpy product for blast furnace consumption. In this study, received sinter from Vizag Steel Plant, India has been used. The soli...
A Study on Quality and Characterisation of Placer Ilmenites from Parts of East Coast of India, with Reference to its Industrial Applicability
Ilmenites from the East Coast of India, from deposits viz Kakinada, Bhimunipatnam, Srikurmam, and Chatrapur have been investigated for their Ore mineralogy and Geochemistry, with particular emphasis on their Industrial s...
Critical Factors Responsible for Failure of Construction Project in Kolkata: an Empirical Study
Priority should be given to the rapidly changing construction industry in India in order to meet the challenges associated with the infrastructure projects management. This study has been performed for identifying the fa...