Features of Structure Formation During the Thermal Synthesis of Powders Carbide-Steels from Waste Sludge of Bearing Steels
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 1
Abstract
The peculiarities of structure and phase composition of the briquettes material obtained by thermal fusion of the mixture consisting of a powder slurry obtained by grinding rollers and cone bearings, titanium hydride and graphite. It was shown that after synthesis at temperatures of 1150÷1200 0С phase composition of the obtained alloy includes mainly phases of titanium carbide, cementite and α-Fe. When boron carbide introduced into the mixture too, the last dissociates during thermal synthesis, resulting along with titanium carbide in the alloy significant content boride phases - TiB, TiB2, Ti2B5 and FeB was identified.
Authors and Affiliations
G. A. Bagliuk, A. A. Mamonova, N. O. Uskova, A. V. Bezdorozhev
Keywords
Related Articles
- EP ID EP313897
- DOI 10.15330/pcss.16.1.167-172
- Views 67
- Downloads 0
Morphology of PbTe Crystal Surface Sputtered by Argon Plasma under Secondary Neutral Mass Spectrometry Conditions
dgman method sputtered by Ar+ plasma with ion energy of 50 – 550 eV for 5 - 50 minutes under Secondary Neutral Mass Spectrometry (SNMS) conditions. The sputtered PbTe crystal surface was found to be simultaneously both t...
The Development of the Atomic Theory of the Formation of a New Phase in Adsorbirivannyh Layers in an External Electric Field
The article deals with the nucleation rate in the development of the atomic theory. The expression for the calculation of heterogeneous nucleation rate in adsorbed layers in an external electric field, which allows for t...
Energy of Substitution of Anions and Cations in Zinc and Cadmium Telluride
Energy substitution of cations and anions in ZnTe i CdTe by atoms from first and seventh group of the periodic table were calculated using the method of bonding orbitals. Based on the results conclusions about the most l...
Analysis of Capacity and Phase Composition of Chromotitanazing Surface
The article deals with the investigation of phase composition and capacity of chromotitanazing surface of steel of 25X5MA. Components made of steel with the coatings applied ШХ-15 and 12XH3A were taken as comparison. Abs...
Electric Stimulation of Charge-Discharge Processes of Electrochemical Capacitors
The research is devoted to study the impact of charge-discharge processes in electrochemical capacitors. Nanoporous carbon material was used like electrode material , which was gotten through carbonization of raw plant m...