FINITE ELEMENT ANALYSIS OF THE STRESS AND STRAIN STATE OF THE NODE OF THE TOP BELT OF THE STEEL AND CONCRETE COMPOSITE CABLE SPACE FRAME
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 171, Issue 5
Abstract
The article presents a design and numerical research of a node connection of spatial modules of the steel and concrete composite cable space frame in top chord. As a result of the research, an effective and simple constructive solution of the node connection of the top belt elements of a new type of double-sided construction was created. The effectiveness of the node was established based on the results of the computer simulation the structure behavior under load for various boundary conditions by the finite element method, and based on the finite element analysis of the stress-strain state. The finite element analysis of the stress-strain state of the node connection for elements of the top belt of the steel and concrete composite cable space frame showed that its design does not have weak sections and places of concentration of considerable stresses. Modeling the behavior of the steel and concrete composite cable space frame under the action of the load showed reliable operation of the node connection. Thus, the node connection that was designed provides joint operation the constituent elements of the steel and concrete composite cable space frame, regardless of the way the external load is applied.
Authors and Affiliations
Grygorii Gasii
Keywords
Related Articles
- EP ID EP313817
- DOI 10.18664/1994-7852.171.2017.111429
- Views 68
- Downloads 0
THE INFLUENCE OF MULTICOMPONENT ADDITIVES ON EFFECTIVE VISCOSITY OF THE MECHANICALLY ACTIVATED CEMENT SUSPENSIONS
The questions of influence of prescription factors (microsilica, superplasticizer Super PK, polypropylene fiber) on changing of effective viscosity mechanical activated cement containing suspensions that are using in tec...
IMPROVING THE EFFICIENCY OF HIGH-SPEED RAILWAY THROUGH THE USE OF THE DC OVERVOLTAGE
The majority of CIS railways are electrified on DC with a voltage in the contact network of 3 kV. However, such a voltage is not optimal either for power supply devices or for electric rolling stock. It is a compromise s...
MATHEMATICAL MODELING OF 2EL5 ELECTRIC LOCOMOTIVE ELECTRIC TRACTION SYSTEM
The efficiency of the AC electric traction system is decisively influenced by the electric locomotives power factor. The power factor of electric locomotives with thyristor AC/DC converters is 0.8…0.84, when a recommende...
MATHEMATICAL MODEL OF INTERACTION OF WAY AND MOBILE COMPOSITION IN AREA OF RAIL JOINTS
A mathematical model characterizing work of rails under action of the vertical loading from mobile composition on the areas of way direct and crooked is developed, and also on the areas of the found in an area rail joint...
ELECTRIC- AND VIBRATION INSULATION MATERIALS ON THE RAILWAY. THE POSSIBILITY OF THEIR PRODUCTION IN UKRAINE
In the article the problems and methods of protecting buildings from the effects of vibration, noise and stray and leakage currents that arise as a result of the movement of rail transport in urban development. Presents...