FLOW VELOCITY MEASUREMENT METHODS USING ELECTRICAL CAPACITANCE TOMOGRAPHY
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2017, Vol 7, Issue 1
Abstract
The current methods of calculating the velocity field based on a twin-plane electrical capacitance system for multiphase flows are presented. The described methods allow to calculate the velocity profile of the multiphase flow in cross-section of industrial installation. The theoretical assumptions of the considered methods are also noticed. The main advantages and disadvantages of the authors’ flow velocity measurement methods are discussed.
Authors and Affiliations
Volodymyr Mosorov, Krzysztof Grudzień, Dominik Sankowski
DEVELOPMENT OF THE INTERNET OF THINGS IN POLAND WITH SPECIAL CONSIDERATION OF THE SOCIETY’S AWARENESS OF THE IOT
The article includes the description of the current development of the Internet of Things (IoT) in Poland with special consideration of the society’s awareness of the IoT. In the recent years, the Internet of Things has...
METROLOGICAL EVALUATION OF MEASUREMENT SYSTEM FOR TWO-PHASE FLOW FRACTIONS DETERMINATION USING 3D ELECTRICAL CAPACITANCE TOMOGRAPHY
The industrial diagnostic and monitoring systems require new methods offering the possibility of non-invasive observation and analysis of the two-phase gas-liquid mixtures flows. The designed new measurement system is de...
APPLICATION OF FLOW GRAPHS IN THE MICROWAVE MEASUREMENTS SYSTEMS
Flow graphs are the effective tool for description of the complicated microwave measurement systems and usually are used in the process of creating measurement equation. The algorithm which can find this equation is...
METHOD OF SAFE LANDING THE EMERGENCY QUADROCOPTER
By means of mathematical modelling, the main features of emergency landing of quadrocopter are determined. The results of simulate landings of the quadrocopter in cases of failure of one of four pairs of electric motor s...
4 KANAŁOWY MODUŁ LED DO SYSTEMU WSPOMAGAJĄCEGO ROZWÓJ ROŚLIN
W artykule przedstawiono moduł oświetleniowy z 24 diodami elektroluminescencyjnymi sterowanymi w 4 niezależnych kanałach. Przeznaczony jest on do pracy w systemach wspomagających rozwój roślin. Jego modułowa konstrukcja...