Frame-based synchronization adaptive method for systems based on DVB-S2 standard on FPGA
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2015, Vol 0, Issue 62
Abstract
Introduction. With the development of digital technology, increasingly greater attention is paid to building radio-receiving paths based on SDR technology (Software Defined Radio). This technology involves the construction of SoC system on FPGA. Synchronization system is an important part of any radio system. This article analyzes the frame synchronization algorithms used today in terms of their efficiency and practical implementation on FPGA. Problem Statement. There are many frame synchronization algorithms for communication systems. Algorithms based on differential correlation method are extensively used these days because they are insensitive to phase and frequency distortions. The main disadvantage of the existing methods is their sensitivity to changes in the level of the input signal. Therefore, the development of the algorithm with an adaptive threshold for implementation on FPGA is an important task. Frame synchronization algorithm for DVB-S2 standard. This section shows analysis of modern frame synchronization algorithms, which are used in DVB-S2 receivers, and shows characteristics of MDP. Frame synchronization algorithm with adaptive threshold. Algorithm with adaptive threshold [P2], which is resistant to changes in the level of the input signal, is suggested. Also a comparative analysis of this method and methods listed above is made. Modification of the algorithm [P2] for implementation on FPGA. This section shows practical ways to implement the adaptive algorithm on FPGA hardware platform. In particular, the approximating method was used to find the location of the complex number modulus, the implementation of which is easily performed on the FPGA chip logic elements without loss of performance of the algorithm as a whole. Conclusions. Suggested adaptive frame synchronization algorithm eliminates Automatic Gain Control (AGC) system from signal processing phase. This approach of using an adaptive threshold can be used for more sophisticated algorithms, in particular for DPDI. In future works, these tasks will be addressed.
Authors and Affiliations
O. Kruhlyk, M. Pavlenko
Keywords
Related Articles
- EP ID EP308801
- DOI 10.20535/RADAP.2015.62.77-86
- Views 79
- Downloads 0
Сriteria of crystal-like structures approaching by impedance delta-inhomogeneities lattices
Introduction. Crystal-like structures (CS) have unique, similar to crystals, band spectral characteristics and form the basis of new various signal processing devices. In this paper the criteria of CS approaching by δ-in...
The flat inductor impedance
The method proposed for calculation a coil in free space is presented. Eddy current transducer mathematical model as a spiral flat inductor in free space is designed as example. It allowed to calculate its impedance, co...
Radiometric modulation measuring device of intensity of optical radiation
Introduction. The paper proposed a block diagram of radiometric measuring the intensity of optical radiation from modulation conversion parameter input . To assess the intensity of use periodically comparing the referenc...
Technical approach to optimal utilization of telecommunication system bandwidth
At the present time, the opportuneness of commercial operations requires the convergence of different types of traffic and the ensuring of the necessary quality of services related to the transmission of data, voice and...
A device of comparison of light-emitting diodes for a light stream
The simple method of comparison of light-emitting diodes after a light stream and possible construction of setting of this method are presented in this article. Parabolic mirrors are specially entered in a construction,...