Free Vibrational Analysis of Magneto-Rheological Aircraft Rib Structure
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
The concept of vibration mitigation with smart fluids within flexible structures has attracted researcher’s interest in the past two decades. A large amount of research work has been done on the structures with electro rheological fluids, but there has been a little work with the magneto rheological fluids. The objective of this research paper is to increase the mechanical vibration absorbing properties of the Magneto Rheological aircraft rib structure as a direct result of increasing its damping ratio via an increased stiffness. This is achieved through the implementation ofthe magnetic field upon the periphery of the proposed model structure under the influence of magnetic flux generated by 100 neodymium magnets, each of which generates a magnetic field intensity of 0.075 Tesla. Upon calculation of the damping ratio of all the entities involved, it was found that the in case of cross beam rib structure the damping ratio saw an increase of 44% and in case of vertical beam structure, the damping ratio saw an increase of 13.7%.
DMATM: Dual Modified Adaptive Technique Based Multiplier
The most critical arithmetic functional units are digital multipliers. This system overall performance is depends on the throughput, of the multiplier. An n-bit by n-bit multiplier can be employed by an n-bit by n-bit mu...
An Innovative Design of Air Filter in Diesel Engines of the Tractors
The escape of small particles in the IC engine combustion chamber will cause wear of the cylinders and pistons and that led to reduce the engine performance and its lifetime service. In this study the air filter system w...
Optimization of PID Controller Gains of an Aircraft Pitch Control System Using Particle Swarm Optimization Algorithm
In this paper, a “Proportional-Integral-Derivative” (PID) controller used in a aircraft pitch control system is optimally tuned to control the output response so as to obtain a much more stable and optimized transient re...
Optimization of Process Parameters of Friction Stir Welding of Aa 6082-T6 Using Grey Based Taguchi Method
Friction stir welding process is a mushy state joining technique and is extensively used for unification of similar and dissimilar metals employed for aerospace, automobile and other fabrication industries. Friction stir...
SINTERING OF IRON POWDER MIXTURES AND DETERMINING THEIR MECHANICAL PROPERTIES
In this investigation, iron-based powder-metal compacts with two distinctive mesh sizes were sintered utilizing microwave heating framework. Iron-based powders of 100 mesh and 300 mesh were blended with mass portions w =...