Friction wear cast iron casting surface hardened by concentrated source of heat
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
In this study surface fusion by the GTAW (in argon atmosphere) surfacing process on plate of cast iron with electric arc advance speeds from 200 to 800 mm/min and current range I=300A were performed. The geometry, microstructure, hardness, friction wear intensity were measured. A stepwise regression method was used to develop relationships between the electric arc advance speed, parameters of fusion geometry, microhardness and friction wear intensity.
Authors and Affiliations
W. Orłowicz, A. Trytek
Keywords
Related Articles
- EP ID EP71687
- DOI -
- Views 95
- Downloads 0
Structure homogeneity as a parameter for evaluation of composite casting quality
The structure of composite materials is be usually described as a compound of two structural components called matrix and reinforcement, respectively. A classic, commonly known example is polyester resin reinforced with...
Application of time-series analysis for prediction of molding sand properties in production cycle
Time-series analysis is characterized, as a data mining tool which facilitates understanding nature of manufacturing processes and permits prediction of future values of the process parameters or production results on th...
Application of laser optical displacement sensor to foundry processes control and research
An experimental set-up elaborated for distance measurement with a use of a laser optical displacement sensor has been described. The features of the elaborated device allow to measure a surface roughness and dimensions o...
The technology of precision casting of titanium alloys by centrifugal process
The article describes the development of a procedure for the preparation of foundry ceramic moulds and making first test castings. The presented studies included: development of technological parameters of the ceramic...
Residual stress state in titanium alloy remelted using GTAW method
Test materials comprised two-phase titanium alloy Ti6Al4V (Grade5). The surface of the tested alloy was remelted by means of TIG welding method using variable current-voltage parameters. The investigations aimed to deter...