Full Factor Experiment for Optimization of Geometric Parameters of the Glass-Furnace Arches
Journal Title: Металлические конструкции - Year 2018, Vol 24, Issue 3
Abstract
The article considers the conduct of a full factorial experiment. The hypothesis of the reproducibility of the experiments was verified, which confirmed the fact that there was no need to conduct a repeat experiment. The emitting model is presented. By the method of least squares, the coefficients of the regression equation were found. The analysis of the model has shown the significance of not only linear effects but also of paired interactions of factors. The response surface is constructed, as well as the two-dimensional cross sections of the response surface.
Authors and Affiliations
Anatoliy Yugov, Anna Ihno, Tatiana Zhmykhova, Sergey Titkov
Keywords
Related Articles
- EP ID EP536569
- DOI -
- Views 109
- Downloads 0
A Determination of the Residual Life of Steel Bin of Coke-Screening Station Taking into Account Operating Corrosive Damages
The article presents the results of analysis of the tensely-deformed state of a steel bunker for storage of coke. The calculation is performed according to engineering procedure and using software complex LIRA-SAPR 2013....
Numerical Determination of The Probability of Failure of a Bent Steel Rod
In this paper, we consider three different methods for calculating the probability of failure (the method of two moments, statistical tests and Monte Carlo) of the rod element. As an example, a calculation is made for a...
The Analysis of the Stress-Strain State of the Optimal Corner Dead-end Support of Overhead Power Transmission Line 110 kV
The analysis of the stress-strain state of dead-end OPTL support which is considered as spatial repeatedly statically indefinable through system with rigid joints is performed. The technique and results of calculation of...
Explosions in the Steel Industry and Their Consequences on the Building Structures of Industrial Buildings
Hazards have been identified; the risk of accidents from explosions during electric steelmaking metal production has been evaluated. A detailed analysis of the causes of the explosion in the electric furnace, the consequ...
Computering Complex of Dimensional Analysis of Beam Metal Structures
This article describes and analyzes the functionality of the new computing complex «Dimensional Analysis of beam structures» (CC DABS). The performed verification CC DABS testifies to the correctness and accuracy of comp...