Fuzzy Logic and PID control of a 3 DOF Robotic Arm
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2017, Vol 5, Issue 4
Abstract
Nowadays, the robotic arms are used in many industrial applications. At this point, high precision control is required for robotics used in fields such as healthcare area. Therefore, the control method applied to robots is also important. In this study, a force was applied to the end function of a three degree-of-freedom robot and the robustness of the controllers are tested. PID and Fuzzy Logic control method are used for this process. The control process of robotic arm which is designed and simulated is obtained by using Fuzzy Logic and classical PID controllers and the results are presented comparatively.
Authors and Affiliations
Korhan KAYIŞLI, Muammer UĞUR
Investigation of the Effect of Chip Breaker Form on Surface Roughness and Cutting Forces in AISI 1040 Steel Milling
In this study, the effects of chip breaker forms (E-PL, M-PL, M-PM, M-MM) on the surface roughness and cutting forces were investigated in milling of AISI 1040 steel at CNC vertical machining center. Experimental studies...
Real Time Measurement of Average Winding Resistances of Transformers
The monitoring of transformers that are expensive equipment of power systems is the one of important issues. Transformer monitoring systems are usually used in order to detect failures, to determine the lifetime, to meas...
Polyurethane Production from Waste Bale Fibers
Nowadays, the methods of eliminating the pollution from wastes of the materials produced as much as the production methods are important. This requires efficiently use of sources economically and ecologically. Polyester...
Factors controlling the formation of hydrothermal sulfur deposits in Keçiborlu mine
Replacement-type subsurface sulphur ores of Keçiborlu are situated in fault controlled and metasomatically altered fragmental ophiolite media between alkaline Pliocene volcanics of Isparta and Afyon regions (SW Turkey)....
Walking Analysis Systems Used in the Diagnosis and Follow-up of Diseases
Gait pattern can be characterized by many measurable parameters like heel strike timing, toe off timing, stride length, stride velocity, motion displacement, pressure distribution under the foot, orientation of the feet...