Real Time Measurement of Average Winding Resistances of Transformers
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 3
Abstract
The monitoring of transformers that are expensive equipment of power systems is the one of important issues. Transformer monitoring systems are usually used in order to detect failures, to determine the lifetime, to measure losses and to monitor winding temperatures. One of the important parameters that can be utilized for this aim is the winding resistances of transformer. Therefore, in this work, a novel method for monitoring the winding resistances of transformer is presented. The method is developed with help of equivalent circuit and power equations of transformer. In computations, voltages and currents at the both sides of transformers are used. Thus, it is provided to monitor the average winding resistance of transformer in real time. Not only the method can be applied to single-phase transformer, but also can be used in three-phase transformers with star-star or delta-star connection. In the paper, firstly, mathematical background of the method is introduced. Then, results of simulations done in Matlab environment and experiments are presented. Simulations and experimental works have demonstrated the validity of the method evidently.
Authors and Affiliations
Cenk GEZEGİN, Hasan DİRİK, Muammer ÖZDEMİR
Keywords
Related Articles
- EP ID EP491128
- DOI 10.29109/gujsc.388278
- Views 97
- Downloads 0
Effect of Induction Surface Hardening on Fatigue Limit of Austempered Ductile Irons
In this study, the effect of induction surface hardening on the fatigue limit of austempered ductile iron was investigated. For this purpose, samples of grade GGG70 ductile iron were austenitized at 900°C for 90 minutes...
SYNTHESIS OF GRAPHENE OXIDE (GO) BY MODIFIED HUMMER’S METHODS AND ITS CHARACTERIZATION
In this study, graphene oxide (GO) was synthesized from naturel graphite powder by using modified Hummer's method. In comparison to the Hummer's method, modified Hummer’s method is safer and more eco-friendly. At the SEM...
The Experimental Investigation of Springback in Titanium Grade 1 Sheet Material and Prediction by Fuzzy Logic
In this study, the springback phenomenon of Titanium Grade 1 sheet metal which is observed after V bending operations in room temperature was investigated experimentally. Bending angle, punch radius and holding time are...
Treatment of Ceramic Factory Masse Glaze Waste Sludge by Sedimentation Method
In this study, the settling behaviour of ceramic factory sludge containing suspended solid particles was investigated both by natural sedimentation and PAM flocculation. By natural sedimentation, the variation of time by...
Cam Design for Exhaust Heat Recovery Six-Stroke Engine with Water Injection
In this study, facing with problems in cam designing using in a six-stroke engine were observed. Cam profile was designed and manufactured with harmonic cam in a single cylinder, overhead valve, six-stroke engine. The va...