GRAVITY MIXERS WITH VIBRATION ACTIVATOR IN CONSTRUCTION ENGINEERING
Journal Title: Architecture and Engineering - Year 2017, Vol 2, Issue 4
Abstract
Vibration processes and corresponding machinery and equipment are widely used in construction, production of construction materials and other industries. Compaction, crushing, separation, piling, dosing and transportation of bulk materials are just several processes where it is expedient to use vibration. The article presents original designs of gravity (drum) mixers with vibration activators placed inside the mixing chamber. A vibration activator is installed in "dead" zones located along the geometrical axis of the mixing chamber where intensity of convective mixing is low. Methods of design of balanced eccentric vibration activators of precessing type are considered. Results of production tests with regard to the industrial design of the gravity vibration mixer are presented. Considerable attention is paid to measurement of the vibration level reflecting the quality of dynamic balancing of the vibration activator. Vibrational impact on the environment and maintenance personnel amounts to ~ 5 m/s2, corresponding to standard values for processing equipment as per GOST 22061-76.
Authors and Affiliations
Victor Kuzmichev, Vladimir Verstov
Keywords
Related Articles
- EP ID EP354652
- DOI 10.23968/2500-0055-2017-2-4-26-33
- Views 78
- Downloads 0
An inductive method of calculation of the deflection of the truss regular type
In this paper, the author proposes a regular option of statically determinate flat truss with a lattice of Shukhov's type working under beam scheme. By induction, using Maple computer algebra system, the exact formula fo...
ASSESSMENT OF SEISMIC INPUT ENERGY BY MEANS OF NEW DEFINITION AND THE APPLICATION TO EARTHQUAKE RESISTANT DESIGN
A methodology for assessing the seismic input energy into structure (building) from earthquake (or seismic) excitation is proposed. The procedure is based on the energy balance of the structure and employs the earthquake...
Analytical and Field Evaluation Methods of the Bearing Capacity of Deep Piles and Barrettes in Soft Soil at St. Petersburg
The standard procedure of the field evaluation methods of the bearing capacity of piles used in Russian Federation is described. A pilot deep pile (length L=52.8m and diameter D=1,2m) constructed under a multi-story bui...
Bending of Sawn Wood Products Obtained from Conventional Sawing and Parallel to Generatrix Sawing
This paper considers bending of sawn wood products obtained from logs by conventional sawing and sawing parallel to generatrix. Issues related to strength and stiffness of sawn wood products sawn parallel to generatrix h...
Deformability and Stability of Rectangular Sandwich Panels with Cuts under In-Plane Loading
In this work the method of defining the critical load for rectangular sandwich panels having within themselves definite length cuts in a direction parallel with one of their sides is described. The coefficients of stabil...