Hollow block floor’s survey of the building of the early 20th century using modern diagnostic methods
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 85, Issue 1
Abstract
The article provides the results of technical survey of the building of the beginning of the 20th century using modern non-destructive testing devices. The possible variants of the design of monolithic hollow floors are analyzed using different cavitation elements. The author determined the construction of the hollow prefabricated-monolithic floor of the building and the strength characteristics of its structural elements. The actual bearing capacity of the floor construction was calculated and the possibility of its further normal operation was established based on the data obtained during the instrumental surveys
Authors and Affiliations
Petro Yasniy, Oleksandr Kononchuk, Oleg Yakubyshyn
Keywords
Related Articles
- EP ID EP252174
- DOI -
- Views 64
- Downloads 0
Results of experimental investigations on finding the torque change of the safety clutch action
Screw conveyors have been widely applied for transporting bulk and lump cargo in various productions processes. However, while transporting jamming of screw operating unit is possible by caused the gap between the screw...
Compressive and tensile strength of reinforced сoncrete with basalt fiber
Nowadays the more often usage of concrete under extreme operating conditions requires invariably improvement of its properties such as: crack, frost, shock resistance and resistance before dynamic loads. It can be realis...
Power electronic devices based on piezoelectric elements: current state and perspectives
The analysis of existing designs of piezoelectric elements, methods of calculation and electrical circuits connecting held systematizing technical solutions in the design and use of power electronics devices based on the...
Mathematical modeling of processes of nonisothermal adsorption, desorption and heat transfer of hydrocarbons in nanoporous catalysts based on zeolite ZSM-5 of exhaust gas neutralization systems
An experimental and theoretical study of the non-isothermal adsorption and desorption of gas using microporous silica beds for motor fuel technology is described. Analytical solutions to the problem of non-isothermal ads...
Stress-strain state of elasto-plastic linearly strengthenable plates with two perpendicular cuts under all-round stretching
Effective numerical methods for solving 2D problems related to the theories of elasticity and plasticity have been worked out. The variation-difference method of building finite difference schemes is extended to disconne...