HVOF SPRAYED NANOSTRUCTURED COMPOSITE COATINGS WITH A REDUCED FRICTION COEFFICIENT
Journal Title: Tribologia - Year 2017, Vol 274, Issue 4
Abstract
Nanostructured materials provide new possibilities, which enable creating composite structures with much better properties than composites obtained from conventional materials. Such a solution facilitates combining selected features of different nanomaterials in order to obtain a composite with the required durability, thermal, insulation, tribological, etc. properties. In the case of a composite containing a solid lubricant, it is comprised of a nanostructured matrix, providing mechanical durability, and an evenly distributed nanostructured solid lubricant. A study of the tribological properties of composite HVOF sprayed from nanostructured WC-12Co mixed with nanostructured Fe3O4, having the properties of the solid lubricant is presented. The coatings were sprayed by means of a Hybrid Diamond Jet system. A T-01 ball on disc tribological tester was used to determine the coefficient of friction on the basis of friction force obtained in the course of continuous measurement at a set load. The result of investigations was compared with properties of coatings sprayed with standard WC-12Co/ Fe3O4.
Authors and Affiliations
Wojciech ŻÓRAWSKI, Medard MAKRENEK, Anna GÓRAL, Sławomir ZIMOWSKI
Keywords
Related Articles
- EP ID EP238760
- DOI 10.5604/01.3001.0010.6056
- Views 78
- Downloads 0
THE ASSESSMENT OF SURFACE WEAR OF EPOXY COATINGS AGED WITH A POTASSIUM HYDROXIDE WATER SOLUTION
The paper concerns the assessment of the influence of ageing with a 20% potassium hydroxide water solution on the wear of an epoxycoated surface. FTIR and X-ray examination proved intensive oxidation of the surface layer...
THE EFFECT OF HEAT TREATMENT ON THE EROSIVE WEAR OF STEEL 40Cr4
The results of studies on the effect of heat treatment on working steel 40Cr4 on erosion wear and tear were presented. The study involved raw, hardened, and hardened and tempered steels. Wear resistance were tested using...
Badania procesu tarcia kinetycznego w ciernych skojarzeniach żeliwo-stal
W artykule przedstawiono przeprowadzone badania tribologiczne wybranego skojarzenia żeliwo–stal. Zaprezentowano w tym celu zbudowane stanowisko badawcze oraz jego oprzyrządowanie pomiarowe. Scharakteryzowano sposób przyg...
SUPPORTING THE EVALUATION OF TRIBOLOGICAL PROCESSES BY MEASURING AND ANALYZING VIBRATIONS GENERATED IN SEIZURE TESTS
The paper presents synthetically obtained research in recent years at the Mining Mechanisation Institute of Silesian University of Technology on the identification of processes of friction and wear on the level of elemen...
WPŁYW DODATKÓW NA STABILNOŚĆ OKSYDACYJNĄ I TRWAŁOŚĆ ZMĘCZENIOWĄ SMAROWANYCH WĘZŁÓW TARCIA
Celem badań było określenie wpływu różnych dodatków, a mianowicie: grafitu, nanostruktur węgla i polimeru PTFE na właściwości smarne w odniesieniu do smaru na bazie oleju parafinowego bez dodatku. Oceniono synergię dział...