Identifying the Elastic Moduli of Composite Plates by Using High-order Theories
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2015, Vol 1, Issue 1
Abstract
The study aims to predict elastic and damping properties of composite laminated plates from the measured mechanical characteristics. The elastic constants and damping properties of a laminated element are determined by using experimental data and the results of a multi level theoretical approach. Solution examples for particular problems are given. On the basis of static three-point bending tests, measured eigenfrequencies, and refined calculation schemes, the elastic properties of layered composite beams were identified. For determining Young’s and shear moduli, the method of genetic minimization of error function was used. It is shown that, by employing combined criteria, the transverse elastic moduli can be determined uniquely. It is shown that, by employing combined criteria, the transverse elastic moduli can be determined. The elastic modules were also determined from measured vibration eigen-frequencies of the beams. New combined criteria of identification – schemes averaged over the calculation results for a homogeneous beam and for a sandwich with a core identical to the homogeneous beam and rigid outer layers are considered. The error function is chosen as the sum of error functions for the homogeneous beam, and for the sandwich. In the present study, combined identification schemes making it possible to unequivocally determine the transverse modules and Poisson ratio are suggested.
Authors and Affiliations
Bohdan Diveyev
Keywords
Related Articles
- EP ID EP200659
- DOI -
- Views 110
- Downloads 0
Optimization of Welding Modes for High-Strength Low-Alloy Domex 700 Steel
The microstructure and hardness of the weld joints of DOMEX 700 steel were investigated. As a result, the optimization of the parameters of robotic arc welding in the environment of protective gases was carried out takin...
Fundamentals of Creation of New Devices for Speed Change Management
The article deals with problem of speed change management in engineering, i.e., hoisting, building, road and land reclamation machines, cars and tractors, machine tools and other equipment. The review of the methods and...
Dynamics of two-mass mobile vibratory robot with electromagnetic drive and vibro-impact operation mode
The purpose of research. Substantiation of inertial, stiffness and excitation parameters of mechanical oscillatory system of mobile vibratory robot in order to maximize its motion speed. Methodology. The technique of the...
Choose of optimal regimes of traffic light control in operating zone of pedestrian crossing
On the given stage of motorization level development and increase of traffic flow intensity, with increasing frequency apply to the implementation of intelligent automated systems of traffic control. The quality of their...
Study of Surface Microstrains by Electron Speckle-Interferometry Methods
Despite the fact that speckle interferometry methods began to develop more than 30 years ago, they still remain a rather exotic laboratory tool that has not received wide practical application in tensometry measurements...