Impact of Hydrocarbon Exploitation Activity on Surface and Underground Waters in the Area
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 2
Abstract
This paper presents the natural components of water, and those of pollution. For this, water samples were taken from the brook that runs through the analysed area, and from a fountain, located on the edge of the village, near which many wells are located. The result of these analyses was compared with the regulation, which refers to the quality of drinking water, aiming at protecting people against the effects of contamination.
Authors and Affiliations
Viorel DRĂGAN, Beatrice TUDOR
Keywords
Related Articles
- EP ID EP597735
- DOI -
- Views 59
- Downloads 0
Thermomechanical Processing of Microalloyed Steels Used for Naval and Oil Industries
This paperwork shows the laboratory experiments made on X60 and X65 steels with several intercritical thermomechanical treatment application. Two variants were used: “down-up” thermomechanical treatment with heating and...
Software Used at Castings Production
The foundry industry has been developed worldwide, a number of software that can assist the design work and various processes in the production of castings. Current usage of such software by metallurgical engineers is po...
Industrial Electron-Beam Equipment on Base of Noble and Non-Ferrous Metals
Method of obtaining of metals and alloys by melting – is basic. By this way make in practice the majority of metals, alloys and ligatures. The essence of a method is, that in special melting device (furnace) to melt meta...
Influence of Some Technological Parameters of Fluidized Bed Carbonitriding on the Surface Hardness of Carbonitrided Parts from Low Alloy Steels
The paper describes the experimental research of thermos-chemical treatment of carbonitriding performed on samples of different brands of low alloy steels. The technological parameters whose influence on the carbonitride...
The Influence of the Temperature Regime on the Mechanical Properties of the Thick Steel Sheets from Carbon and Low-Alloy Steels, Laminated to Thicknesses Less than 40 mm
Steel remains the most used material in the machinery industry, the construction of oil and gas pipelines, etc. Hot rolling is no longer a simple means of obtaining the final geometry of products in the steel industry, b...