Implementation of New Three Phase Modular Multilevel Inverter for Renewable Energy Applications
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 3
Abstract
This project proposes a new three-phase modular multilevel inverter (MMLI) for renewable applications. The cascaded multilevel inverters are the most favourable topologies of multilevel converters. This project introduces a new multilevel inverter topology in which the numbers of independent dc voltage sources are reduced. Beside the number of dc voltage sources, in the proposed topology the number of switches is also reduced in comparison with that of the conventional cascaded multilevel inverter. A new modified pulse-width modulation method i.e. sinusoidal pulse width modulation is successfully applied to proposed inverter. To verify the applicability and performance of the proposed structure in PV renewable energy environment, simulation results are carried out by MATLAB/SIMULINK.
Authors and Affiliations
G. Deepa lakshmi, G. Arun sankar
Keywords
Related Articles
- EP ID EP387215
- DOI 10.9790/1676-120302130136.
- Views 172
- Downloads 0
Analysis and comparison of different PV technologies for determining the optimal PV panels- A case study in Mohammedia , Morocco.
This study focuses on the analysis and comparison of three different photovoltaic technologies of silicon module: Amorphous silicon (a-Si), polycrystalline silicon (pc-Si) and monocrystalline silicon (mc-si) with 2 KWp f...
Sustainable Biodiesel Reactor Prototype Energetically Powered By Solar Energy
The study of routes aiming the implementation and use alternative energy sources has increased exponentially during the last decades, due to reduction of petroleum reserves and environmental damage related to fossil fuel...
Dendrite Growth Model at Bonded (001) GaAs Interface
A periodic GaAs wafer-bonded structure was used for nonlinear optical device. Results showed voids present at the bonded GaAs twin boundary. These voids were caused by natural topographical irregularities and surface con...
Pick and Place Robotic Arm Implementation Using Arduino
A robotic arm is designed using arduino to pick and place the objects via user commands. It will pick and place an object from source to destination safely. The soft catching gripper used in the arm will not apply any ex...
Power Quality Issues of Single Phase PFC Low Frequency Active Converter
The equipment connected to an power distribution network usually needs some kind of power conditioning, typically rectification, which produces a non-sinusoidal line current due to the non-linear input characteristic. Wi...