Improvement of performance of finishing of details with a cutting tool
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2017, Vol 80, Issue 2
Abstract
The possibilities of increasing the productivity of finishing blade processing due to the control of cutting modes are analyzed. Prospective approaches to increasing the feed and cutting speed on examples of an oblique cutter, tools equipped with polycrystalline superhard composites based on cubic boron nitride, tools with protective coatings are considered. The use of tools developed taking into account the features of the phenomena occurring in the cutting zone, the use of cutting tools with special protective coatings provides the possibility of performing finishing blades with high productivity.
Authors and Affiliations
S. A. Klimenko
Keywords
Related Articles
- EP ID EP256868
- DOI -
- Views 104
- Downloads 0
Solenoid antenna of radio engineering system of metal identification
The detection of metallic objects hidden in a dielectric medium is carried out with the aid of metal detectors constructed on a vortical current principle. Then detected metal is identified. For identification of metals,...
Determination of the regularities of formation of the profile error at the grinding of products-shells from brittle non-metallic materials
There are certain requirements to the quality of profile-composite thin-walled shells used in aerospace engineering. All the necessary characteristics of the items (such as thickness, profile accuracy and surface quality...
Stressed-deformed state of mountain rocks in elastic stage and between elasticity
The problems of the stress-strain state of rocks in the elastic stage and beyond the elastic limits, and the ways of schematizing the tension and compression diagrams were reviewed in the article. To simplify calculation...
UWB antenna system for mobile bearing finder of radio and television stations
This research discusses the problem of development and manufacturing of the ultra-wideband (UWB) antenna element and antenna system on the basis of such element for mobile bearing finder of radio and television signals w...
Determination of rational conditions of application of rock layered milling combines on iron ore pits
The method of determining the effective use of milling type surface miners for the use of non-blasting technology of layer milling of rocks during open exploration of iron ore deposits has been improved. The non-blasting...