Solenoid antenna of radio engineering system of metal identification

Abstract

The detection of metallic objects hidden in a dielectric medium is carried out with the aid of metal detectors constructed on a vortical current principle. Then detected metal is identified. For identification of metals, as usual, chemical, optoelectric, X-ray methods are used. But detection and identification can be done simultaneously using the graphic-digital image method. In such devices a coaxial solenoid antenna of the frame type is used. But it has low sensitivity, uneven depth sensitivity and a significant parasitic connection between the receiving and transmitting antennas. From such shortcomings, a free antenna is a DD type system, but it does not allow the use of a graphical-digital signal processing method. Therefore, a new design of the antenna system is proposed, which allows us to take advantage of the considered signal processing method and DD antennas. It is characterized in that one of the antennas, for example, a transmitter, consists of two parts that are symmetrically placed relative to the second and creates two active radiation zones, such as a coaxial antenna, but are similar to the radiation zones of the DD type antenna. Keywords: radio engineering system; antenna; identification of metals; method of graphic-digital images

Authors and Affiliations

A. Abramovych, V. Piddubnyi

Keywords

Related Articles

Research of the stress condition of cast billets blade chisel

Models of a drill bit and a mold were developed. Melted steel pouring process was studied. Residual stresses distributions for different sections of a blade bit were studied. The highest residual stresses were observed i...

Social responsibility of industrial enterprises for the protection of environment

The article analyzes the issues of social responsibility of industrial enterprises for the protection of environment. The theoretical and methodological approaches to the definition of the essence of social responsibili...

The influence of the parameters of a vibration separator with a horizontal sieves layering on the intensity of separation

To conduct a research, a vibration separator with horizontal screening was selected. It is characterized by simplicity of design and service, low sensitivity to the properties of the mixture being separated, variety of f...

A stability analysis of stationary conditions of a wheeled vehicle of a non-linear model

Non-linear equations of turnability of a two-axle wheeled vehicle and an equation equivalent to the Pevzner equation for defining the whole set of stationary conditions of its model are derived. The advantages of the pre...

The choice of diamond powder for vibro-abrasive processing of cutting inserts from composites based on cubic boron nitride

The article presents the results of experimental studies of the possibility of vibro-abrasive processing of samples with PNTM on the basis of CNB using suspensions, yaks have in their warehouses diamond powders in variou...

Download PDF file
  • EP ID EP624477
  • DOI -
  • Views 113
  • Downloads 0

How To Cite

A. Abramovych, V. Piddubnyi (2019). Solenoid antenna of radio engineering system of metal identification. Вісник Житомирського державного технологічного університету. Серія: Технічні науки, 83(1), 188-196. https://europub.co.uk/articles/-A-624477