Improvement of the combustion process of diesel engine fuel
Journal Title: Праці Одеського політехнічного університету - Year 2017, Vol 2, Issue 52
Abstract
To solve the problem of converting fuel energy in the diesel engine in order to increase its efficiency, it is necessary to create additional conditions for the turbulence of the working mixture. It is proposed to introduce with a certain frequency of surplus air in the work process of the engine, which create additional sources of combustion of fuel and thereby more dynamic transformation of fuel energy into the dynamic process of motion of the piston. In order to realize the proposed technology, diesel engines and microwave differential pressures were used in the working process zone created by the piston and combustion chamber. Solving the problem of fuel combustion and increasing the efficiency of a diesel engine was carried out by creating the holes with relief valves in the piston. The technology and design of a piston with a technological cavity, which differs from previous designs with the presence of pneumatic and air vibropressing in the volume of the combustion chamber, is proposed for the first time, which allows to significantly increase the engine efficiency. The main results of the work were patented under the name of the patent “The method of pneumatic pressuring of the working mixture of a diesel engine”.
Authors and Affiliations
L. M. Petrov, T. N. Borisenko
Keywords
Related Articles
- EP ID EP319355
- DOI 10.15276/opu.2.52.2017.04
- Views 144
- Downloads 0
Investigation of the influence of various factors on the power of heat exchange by radiation
The issue of lack of knowledge of radiation heat transfer process has been repeatedly raised in various studies. Despite the fact that works on study of heat transfer by radiation covers a wide range of different industr...
The problem of minimizing the radioactive leakage into the VVER circuit under normal conditions
According to the Strategic Energy Technologies plan, two priorities have been accepted by the European Commis-sion: develop and strengthen energy-efficient systems; increase safety in the use of nuclear energy. The aim o...
Influence of organic ligands on copper electrodeposition from mono- and polyligand electrolytes
It is important to know the laws of copper electrodeposition from low-concentrated electrolytes containing different ligands because they simulate components of various copper-containing liquid wastes and electrolytes fo...
The algorithms for automated calculation of the furnace charge in smelting and refining metal
The production of the initial liquid metal with minimal departures from the regulated chemical composition is one of the main conditions for the production of high-quality castings with predetermined physical, mechanical...
Exergic balance and efficiency of reverse osmosis modules
In this paper the option of using exergy analysis method is proposed for preparing make-up water by reverse osmosis systems (ROS), which are spreading in the reconstruction of the chemical departments of Ukrainian nuclea...