Influence of high pressure and high temperature hydrogen on fracture toughness of Ni-containing steels and alloys

Journal Title: Archive of Mechanical Engineering - Year 2014, Vol 0, Issue 1

Abstract

The effect of hydrogen on short-term strength, low-cycle durability and planestress fracture toughness of 10Cr15Ni27 steel, 04Cr16Ni56 and 05Cr19Ni55 alloys at pressure up to 35 MPa and temperature 293. . . 773 K was investigated. The modes of hydrogen action for which the elongation delta, reduction of area ksi, low-cycle durability N and crack resistance parameters K_c of alloys are minimal were established: hydrogen pressure above 10 MPa (non-hydrogenated specimens of 04Cr16Ni56 alloy) and above 15 MPa (hydrogenated specimens of 10Cr15Ni27 steel and 05Cr19Ni55 alloy, hydrogen concentration 15 and 19 wppm, respectively).

Authors and Affiliations

Volodymyr Mochulskyi, Ljubomyr Ivaskevich, Oleg Skolozdra, Alexander Balitskii, Jacek Eliasz

Keywords

Related Articles

Investigation of design features of compressor casing treatment

Casing treatment in the form of circumferential grooves over a rotor blade tips is used for improvement of an axial compressor performance. Usually, these grooves extend compressor’s stall range (stable operational range...

Effect of tool geometry and welding speed on mechanical properties and microstructure of friction stir welded joints of aluminium alloys AA6082-T6

Friction stir welding is a solid state innovative joining technique, widely being used for joining aluminium alloys in aerospace, marine automotive and many other applications of commercial importance. The welding parame...

Preface

Thespecial issue of Archive of Mechanical Engineering consists of selected, revised and extended versions of papers presented at the conference, reporting on the state-of-the-art in the advances of computational multibod...

List of reviewers

List of reviewers, 2014

Experimental investigations of a drifting cloud of droplets dispersed from aircraft

With widespread use of pesticides in modern agriculture, the impacts of spray drift have become a topic of considerable interest. The drifting of sprays is a highly complex process influenced by many factors. The paper p...

Download PDF file
  • EP ID EP166395
  • DOI 10.2478/meceng-2014-0007
  • Views 84
  • Downloads 0

How To Cite

Volodymyr Mochulskyi, Ljubomyr Ivaskevich, Oleg Skolozdra, Alexander Balitskii, Jacek Eliasz (2014). Influence of high pressure and high temperature hydrogen on fracture toughness of Ni-containing steels and alloys. Archive of Mechanical Engineering, 0(1), 129-138. https://europub.co.uk/articles/-A-166395