Influence of mean stress on the fatigue strength of ASTM A743 CA6NM alloy steel
Journal Title: Frattura ed Integrità Strutturale - Year 2010, Vol 4, Issue 14
Abstract
The objective of this work is to evaluate the effects of mean stress on the fatigue behavior of ASTM A743 CA6NM alloy steel. It is used in several hydrogenator turbine components. In order to achieve it, 33 specimens were experimentally evaluated under axial loads with stress ratio of - 1 and more 60 specimens were tested under stress ratio 0, 1/3 and 2/3. Based on the obtained results it was possible to determine parameters that describe the fatigue behavior of the evaluated material, obtain its S-N curves, its endurance limit and its scatter bands. In the assessment of the mean stress effects of fatigue life, Goodman, Gerber, Walker and Kwofie’s relations were tested in order to evaluate the validity of the use of such rules for the tested material. According to the obtained results it was possible to verify that Goodman and Gerber’s relations do not model correctly the reduction effect fatigue life and presented high scatter. The predictions of Walker and Kwofie’s relation are consistent and the Walker’s relation presented smaller scatter than Kwofie’s relation. Walker’s relation makes it possible to evaluate in a consistent way the effect of the presence of mean stresses on fatigue strength.
Authors and Affiliations
B. L. da Silva, J. L. de Almeida Ferreira, F. Oliveira, J. A. Araùjo
Keywords
Related Articles
- EP ID EP155578
- DOI 10.3221/IGF-ESIS.12.02
- Views 53
- Downloads 0
Numerical homogenization of piezoelectric textileswith electrospun fibers for energy harvesting
Piezoelectric effects are exploited in an increasing number of micro- and nano-electro-mechanicalsystems. In particular, energy harvesting devices convert ambient energy (i.e. mechanical pressure) into electricalen...
Photoelastic stress analysis assisted evaluation of fracture toughness in hydrothermally aged epoxies
The present work has investigated the fracture toughness of a model DGEBA epoxy system subject to Hidro-Thermal aging. A Photoelastic Stress Analysis technique has been implemented, showing the evolution of stres...
Fatigue behaviour of titanium dental endosseous implants
In this work two different titanium dental implants are analyzed in order to evaluate their mechanical strength. An ad-hoc designed experimental apparatus is prepared to test against fatigue these implants in a way that...
Modification of creep and low cycle fatigue behaviour induced by welding
In this work, the mechanical properties of Waspaloy superalloy have been evaluated in case of welded repaired material and compared to base material. Test program considered flat specimens on base and TIG welded...
Structural durability assessment of welded offshore K-nodes by different local design concepts
The structural durability design of complex welded structures should not rely only on one single design method but should apply different methods for assuring the reliability of the assessment. In this context the applic...