Influence on Reduction Scheme Hardness Cold Rolled Strip Mark Steel ST 12
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 4
Abstract
The paper presents the results of the research on the influence of the evolution hardness scheme rolled steel, for the cold-rolled strip steel St 12. St 12 is intended for the manufacture of cold rolled strip stamping properties environments. We studied three variants of rolling with the same degree of deformation. The total = 60% of the samples submitted to the research were divided into 3 groups. Samples from the first group were rolled with uniform reduction coefficient increased from the first to the last pass. Samples from the second group were rolled with constant coefficients decreased from the first to the last pass. Samples of the third group were rolled with uniform reduction coefficient decreased from the first to the last pass. By statistical processing of the experimental data was done correlation HRB = f (ε) using an equation like: HRB = HRB0 + a × εb from which the mathematical calculations specific led to obtain equations curves hardening for the three kinds of rolling schemes. Following research consisting in observing as steel hardening analyzed has a very high speed we can say that the limit of plasticity of the material cold rolling is more than 60% where cracks are observed.
Authors and Affiliations
Marian-Iulian NEACȘU, Viorel Mircea DRĂGAN
Keywords
Related Articles
- EP ID EP575005
- DOI -
- Views 93
- Downloads 0
Properties and Applications of Nanocellulose Polymer Composites. A Short Review
This paper covers some aspects related to the structure of natural cellulose fibers as well the sources, obtaining methods, properties and their applications. In contrast with aramide and other materials resulted from fo...
Research on the Production of Sintered Powder 316
The 316 austenitic stainless steel powders are typically used in applications requiring good corrosion resistance, mechanical strength at high and very low temperatures, good ductility, wear resistance, associated in som...
Mechanical Resistance as a Function of Local Properties
The present study makes an estimation of an automotive engine piston mechanical properties and fatigue life based on some characteristics of metallurgical microstructure. Because it is intended to assess the properties i...
Basic Mathematical Modeling of the Environmental Processes in the Lower Danube Region [I]
In most environmental pollution problems, the pollutant is released to the environment by the, almost always, turbulent flow of a carrier fluid. The pollutant mixes with the surrounding fluid (air or water) and undergoes...
Nanostructured Surface for 38MoCrAl09 Steel by Nitriding in Nitrogen Atmosphere and YAG:Nd Pulse Laser Activation
YAG:Nd pulse laser is usually used for cutting and welding. The paper is based by experiments using YAG:Nd pulse laser (KVANT 17-CIS made). Technological modules were assembled for laser beam deviation and for relative s...